[SOLVED] Problem with Intel 82579V and 82574L NIC.

Issues related to configuring your network
acjantsch
Posts: 10
Joined: 2011/12/19 22:43:55
Contact:

[SOLVED] Problem with Intel 82579V and 82574L NIC.

Post by acjantsch » 2011/12/19 23:00:27

Hello all,

Today my firewall with Centos 6.0 64 crashed, putting out all my network.

Checking the logs I found some error messages.

I have another firewall running with Centos 6.0 32 bits and never had this problem.

Some kind soul can help me solve this problem?

Thanks.


ETH1:

Dec 19 16:39:32 fw-cygnus kernel: e1000e 0000:03:00.0: eth1: Reset adapter
Dec 19 16:39:32 fw-cygnus lldpad[1468]: vdp_ifdown:eth1 vdp data remove failed
Dec 19 16:39:32 fw-cygnus kernel: e1000e 0000:03:00.0: eth1: Reset adapter
Dec 19 16:39:34 fw-cygnus kernel: e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
Dec 19 16:39:34 fw-cygnus kernel: e1000e 0000:03:00.0: eth1: 10/100 speed: disabling TSO
Dec 19 16:39:34 fw-cygnus lldpad[1468]: vdp_ifup(1364): port eth1 not enabled for RxTx (0) !
Dec 19 16:40:28 fw-cygnus kernel: irq 35: nobody cared (try booting with the "irqpoll" option)
Dec 19 16:40:28 fw-cygnus kernel: Pid: 0, comm: swapper Tainted: G W ---------------- 2.6.32-131.21.1.el6.x86_64 #1
Dec 19 16:40:28 fw-cygnus kernel: Call Trace:
Dec 19 16:40:28 fw-cygnus kernel: [] ? __report_bad_irq+0x2b/0xa0
Dec 19 16:40:28 fw-cygnus kernel: [] ? note_interrupt+0x18c/0x1d0
Dec 19 16:40:28 fw-cygnus kernel: [] ? handle_edge_irq+0xdd/0x160
Dec 19 16:40:28 fw-cygnus kernel: [] ? tick_check_idle+0xb6/0xe0
Dec 19 16:40:28 fw-cygnus kernel: [] ? handle_irq+0x49/0xa0
Dec 19 16:40:28 fw-cygnus kernel: [] ? do_IRQ+0x6c/0xf0
Dec 19 16:40:28 fw-cygnus kernel: [] ? ret_from_intr+0x0/0x11
Dec 19 16:40:28 fw-cygnus kernel: [] ? acpi_idle_enter_bm+0x29c/0x2d0
Dec 19 16:40:28 fw-cygnus kernel: [] ? acpi_idle_enter_bm+0x295/0x2d0
Dec 19 16:40:28 fw-cygnus kernel: [] ? cpuidle_idle_call+0xa7/0x140
Dec 19 16:40:28 fw-cygnus kernel: [] ? cpu_idle+0xb6/0x110
Dec 19 16:40:28 fw-cygnus kernel: [] ? rest_init+0x7a/0x80
Dec 19 16:40:28 fw-cygnus kernel: [] ? start_kernel+0x41d/0x429
Dec 19 16:40:28 fw-cygnus kernel: [] ? x86_64_start_reservations+0x125/0x129
Dec 19 16:40:28 fw-cygnus kernel: [] ? x86_64_start_kernel+0xfa/0x109
Dec 19 16:40:28 fw-cygnus kernel: handlers:
Dec 19 16:40:28 fw-cygnus kernel: [] (e1000_msix_other+0x0/0xe0 [e1000e])
Dec 19 16:40:28 fw-cygnus kernel: Disabling IRQ #35
Dec 19 16:40:44 fw-cygnus kernel: e1000e 0000:03:00.0: eth1: Reset adapter
Dec 19 16:40:44 fw-cygnus kernel: e1000e 0000:03:00.0: eth1: Reset adapter
Dec 19 16:40:44 fw-cygnus lldpad[1468]: vdp_ifdown:eth1 vdp data remove failed



ETH0:
[root@fw-cygnus opt]# dmesg | grep eth
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) e0:69:95:c8:b5:be
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
e1000e 0000:03:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:1b:21:c6:d2:5c
e1000e 0000:03:00.0: eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:03:00.0: eth1: MAC: 3, PHY: 8, PBA No: E46981-006
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 100 Mbps Half Duplex, Flow Control: RX/TX
e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
e1000e 0000:03:00.0: eth1: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
8021q: adding VLAN 0 to HW filter on device eth1
eth0: no IPv6 routers present
e1000e: eth0 NIC Link is Down
eth1: no IPv6 routers present
e1000e: eth0 NIC Link is Up 100 Mbps Half Duplex, Flow Control: RX/TX
e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
e1000e: eth0 NIC Link is Down
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
e1000e: eth0 NIC Link is Down
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
e1000e: eth0 NIC Link is Down
e1000e: eth0 NIC Link is Up 100 Mbps Half Duplex, Flow Control: RX/TX
e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO

LSPCI:
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network Connection (rev 05)
00:1a.0 USB Controller: Intel Corporation 6 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 2 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 4 (rev b5)
00:1d.0 USB Controller: Intel Corporation 6 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation H67 Express Chipset Family LPC Controller (rev 05)
00:1f.2 IDE interface: Intel Corporation 6 Series Chipset Family 4 port SATA IDE Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series Chipset Family SMBus Controller (rev 05)
00:1f.5 IDE interface: Intel Corporation 6 Series Chipset Family 2 port SATA IDE Controller (rev 05)
01:00.0 PCI bridge: Integrated Technology Express, Inc. Device 8892 (rev 10)
03:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
04:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)

:-?

User avatar
TrevorH
Forum Moderator
Posts: 30575
Joined: 2009/09/24 10:40:56
Location: Brighton, UK

Re: Problem with Intel 82579V and 82574L NIC.

Post by TrevorH » 2011/12/19 23:15:10

82574 adapters are known to have a hardware problem that requires a special fix in the driver. I am unsure if the fix for this has made it into CentOS 6.1 or 6.2 but the kmod-e1000e from ELrepo does have the fix and can be installed from there.

acjantsch
Posts: 10
Joined: 2011/12/19 22:43:55
Contact:

Re: Problem with Intel 82579V and 82574L NIC.

Post by acjantsch » 2011/12/20 01:34:50

Hi,

Thanks for help. I'll try.

Do you recommend or know of any network adapter 200% compatible with Centos 6?

Please, if possible send me the part #.

I prefer to replace the network cards.

Thanks.

User avatar
TrevorH
Forum Moderator
Posts: 30575
Joined: 2009/09/24 10:40:56
Location: Brighton, UK

Re: Problem with Intel 82579V and 82574L NIC.

Post by TrevorH » 2011/12/20 03:02:28

I just checked the changelog from the most recent CentOS 6 kernel and it says that it includes the e1000e driver version 1.2.20

[quote]
- [netdrv] e1000e: upstream to upstream version 1.2.20 (Andy Gospodarek) [636325]
[/quote]

and this bug is meant to be fixed in 1.2.10. So you don't need to change your ethernet card, you just need to update your kernel to at least 2.6.32-102.el6 or higher.

acjantsch
Posts: 10
Joined: 2011/12/19 22:43:55
Contact:

Re: Problem with Intel 82579V and 82574L NIC.

Post by acjantsch » 2011/12/20 11:43:23

Hi Trevor,

My Kernel is 2.6.32-131.21.1.el6.x86_64.

I updated the drivers, but I'm still worried.

Thanks again.

acjantsch
Posts: 10
Joined: 2011/12/19 22:43:55
Contact:

Re: Problem with Intel 82579V and 82574L NIC.

Post by acjantsch » 2011/12/20 14:56:12

Hi,

Crashed again.

Dec 20 11:08:14 fw-cygnus kernel: e1000e: eth0 NIC Link is Down
Dec 20 11:08:14 fw-cygnus lldpad[1441]: vdp_ifdown:eth0 vdp data remove failed

But this crash is with eth0 onboard 82579V.

pschaff
Retired Moderator
Posts: 18276
Joined: 2006/12/13 20:15:34
Location: Tidewater, Virginia, North America
Contact:

[SOLVED] Problem with Intel 82579V and 82574L NIC.

Post by pschaff » 2011/12/23 23:39:15

First thing to try would be to update to 6.2 with kernel-2.6.32-220.2.1.el6. If that does not help, then please [url=http://www.centos.org/modules/newbb/viewtopic.php?topic_id=28723&forum=54]provide more information about your system[/url] by running "./getinfo.sh" and showing us the output file.

acjantsch
Posts: 10
Joined: 2011/12/19 22:43:55
Contact:

Re: Problem with Intel 82579V and 82574L NIC.

Post by acjantsch » 2011/12/28 17:45:40

Hello,

I updated to Centos 6.2: 2.6.32-220.2.1.el6.x86_64 #1 SMP Fri Dec 23 02:21:33 CST 2011 x86_64 x86_64 x86_64 GNU/Linux

But the problem remains.

My getinfo.

Information for general problems.
[code]
== BEGIN uname -rmi ==
2.6.32-220.2.1.el6.x86_64 x86_64 x86_64
== END uname -rmi ==

== BEGIN rpm -qa \*-release\* ==
centos-release-6-2.el6.centos.7.x86_64
rpmforge-release-0.5.2-2.el6.rf.x86_64
elrepo-release-6-4.el6.elrepo.noarch
== END rpm -qa \*-release\* ==

== BEGIN cat /etc/redhat-release ==
CentOS release 6.2 (Final)
== END cat /etc/redhat-release ==

== BEGIN getenforce ==
Disabled
== END getenforce ==

== BEGIN free -m ==
total used free shared buffers cached
Mem: 7651 2375 5276 0 282 1491
-/+ buffers/cache: 601 7050
Swap: 15999 0 15999
== END free -m ==

== BEGIN rpm -qa yum\* rpm-\* python | sort ==
python-2.6.6-29.el6.x86_64
rpm-libs-4.8.0-19.el6.x86_64
rpm-python-4.8.0-19.el6.x86_64
yum-3.2.29-22.el6.centos.noarch
yum-metadata-parser-1.1.2-16.el6.x86_64
yum-plugin-fastestmirror-1.1.30-10.el6.noarch
yum-utils-1.1.30-10.el6.noarch
== END rpm -qa yum\* rpm-\* python | sort ==

== BEGIN ls /etc/yum.repos.d ==
CentOS-Base.repo
CentOS-Debuginfo.repo
CentOS-Media.repo
elrepo.repo
mirrors-rpmforge
mirrors-rpmforge-extras
mirrors-rpmforge-testing
rpmforge.repo
== END ls /etc/yum.repos.d ==

== BEGIN cat /etc/yum.conf ==
[main]
cachedir=/var/cache/yum/$basearch/$releasever
keepcache=0
debuglevel=2
logfile=/var/log/yum.log
exactarch=1
obsoletes=1
gpgcheck=1
plugins=1
installonly_limit=5
bugtracker_url=http://bugs.centos.org/set_project.php?project_id=16&ref=http://bugs.centos.org/bug_report_page.php?category=yum
distroverpkg=centos-release

# This is the default, if you make this bigger yum won't see if the metadata
# is newer on the remote and so you'll "gain" the bandwidth of not having to
# download the new metadata and "pay" for it by yum not having correct
# information.
# It is esp. important, to have correct metadata, for distributions like
# Fedora which don't keep old packages around. If you don't like this checking
# interupting your command line usage, it's much better to have something
# manually check the metadata once an hour (yum-updatesd will do this).
# metadata_expire=90m

# PUT YOUR REPOS HERE OR IN separate files named file.repo
# in /etc/yum.repos.d
== END cat /etc/yum.conf ==

== BEGIN yum repolist all ==
Loaded plugins: fastestmirror, refresh-packagekit
Loading mirror speeds from cached hostfile
* base: centos.pop.com.br
* elrepo: mirror.symnds.com
* extras: centos.pop.com.br
* rpmforge: fr2.rpmfind.net
* updates: centos.pop.com.br
repo id repo name status
base CentOS-6 - Base enabled: 6,294
c6-media CentOS-6 - Media disabled
centosplus CentOS-6 - Plus disabled
contrib CentOS-6 - Contrib disabled
debug CentOS-6 - Debuginfo disabled
elrepo ELRepo.org Community Enterprise Linux Repository enabled: 155
elrepo-extras ELRepo.org Community Enterprise Linux Repository disabled
elrepo-kernel ELRepo.org Community Enterprise Linux Kernel Rep disabled
elrepo-testing ELRepo.org Community Enterprise Linux Testing Re disabled
extras CentOS-6 - Extras enabled: 3
rpmforge RHEL 6 - RPMforge.net - dag enabled: 4,091
rpmforge-extras RHEL 6 - RPMforge.net - extras disabled
rpmforge-testing RHEL 6 - RPMforge.net - testing disabled
updates CentOS-6 - Updates enabled: 159
repolist: 10,702
== END yum repolist all ==

== BEGIN egrep 'include|exclude' /etc/yum.repos.d/*.repo ==
== END egrep 'include|exclude' /etc/yum.repos.d/*.repo ==

== BEGIN sed -n -e "/^\[/h; /priority *=/{ G; s/\n/ /; s/ity=/ity = /; p }" /etc/yum.repos.d/*.repo | sort -k3n ==
== END sed -n -e "/^\[/h; /priority *=/{ G; s/\n/ /; s/ity=/ity = /; p }" /etc/yum.repos.d/*.repo | sort -k3n ==

== BEGIN cat /etc/fstab ==

#
# /etc/fstab
# Created by anaconda on Fri Dec 9 09:25:40 2011
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
UUID=375a6770-8e8f-4db9-bf73-036a955e3383 / ext4 defaults 1 1
UUID=d1703ab4-f483-4a0b-ba3f-9e55ae3e7b05 /boot ext4 defaults 1 2
UUID=7c8a0e1f-c2ca-4b56-9d75-c6cf7dd8ff04 /cache ext4 defaults 1 2
UUID=43498095-ec79-47ec-84d8-7deb5e2fd65b /opt ext4 defaults 1 2
UUID=c8cb25f9-697c-43b9-a4c1-485a1e6dd254 /var ext4 defaults 1 2
UUID=6b9cc5a4-d309-4e26-bcf3-d609c0b45b01 swap swap defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
== END cat /etc/fstab ==

== BEGIN df -h ==
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 97G 2.7G 93G 3% /
tmpfs 3.8G 0 3.8G 0% /dev/shm
/dev/sda1 9.7G 271M 8.9G 3% /boot
/dev/sda7 146G 11G 128G 8% /cache
/dev/sda5 97G 203M 92G 1% /opt
/dev/sda3 97G 1.2G 91G 2% /var
== END df -h ==

== BEGIN fdisk -l ==

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000eb250

Device Boot Start End Blocks Id System
/dev/sda1 * 1 1275 10240000 83 Linux
/dev/sda2 1275 14024 102400000 83 Linux
/dev/sda3 14024 26772 102400000 83 Linux
/dev/sda4 26772 60802 273345536 5 Extended
/dev/sda5 26772 39520 102400000 83 Linux
/dev/sda6 39520 41560 16384000 82 Linux swap / Solaris
/dev/sda7 41560 60802 154558464 83 Linux
== END fdisk -l ==

== BEGIN blkid ==
/dev/sda1: UUID="d1703ab4-f483-4a0b-ba3f-9e55ae3e7b05" TYPE="ext4"
/dev/sda2: LABEL="_CentOS-6.0-x86_" UUID="375a6770-8e8f-4db9-bf73-036a955e3383" TYPE="ext4"
/dev/sda3: UUID="c8cb25f9-697c-43b9-a4c1-485a1e6dd254" TYPE="ext4"
/dev/sda5: UUID="43498095-ec79-47ec-84d8-7deb5e2fd65b" TYPE="ext4"
/dev/sda6: UUID="6b9cc5a4-d309-4e26-bcf3-d609c0b45b01" TYPE="swap"
/dev/sda7: UUID="7c8a0e1f-c2ca-4b56-9d75-c6cf7dd8ff04" TYPE="ext4"
== END blkid ==

== BEGIN cat /proc/mdstat ==
Personalities :
unused devices: <none>
== END cat /proc/mdstat ==

== BEGIN pvs ==
== END pvs ==

== BEGIN vgs ==
No volume groups found
== END vgs ==

== BEGIN lvs ==
No volume groups found
== END lvs ==

== BEGIN rpm -qa kernel\* | sort ==
kernel-2.6.32-131.21.1.el6.x86_64
kernel-2.6.32-220.2.1.el6.x86_64
kernel-2.6.32-220.el6.x86_64
kernel-2.6.32-71.29.1.el6.x86_64
kernel-2.6.32-71.el6.x86_64
kernel-firmware-2.6.32-220.2.1.el6.noarch
kernel-headers-2.6.32-220.2.1.el6.x86_64
== END rpm -qa kernel\* | sort ==

== BEGIN lspci -nn ==
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0100] (rev 09)
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0102] (rev 09)
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
00:19.0 Ethernet controller [0200]: Intel Corporation 82579V Gigabit Network Connection [8086:1503] (rev 05)
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05)
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5)
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5)
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5)
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05)
00:1f.0 ISA bridge [0601]: Intel Corporation H67 Express Chipset Family LPC Controller [8086:1c4a] (rev 05)
00:1f.2 IDE interface [0101]: Intel Corporation 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller [8086:1c00] (rev 05)
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05)
00:1f.5 IDE interface [0101]: Intel Corporation 6 Series/C200 Series Chipset Family 2 port SATA IDE Controller [8086:1c08] (rev 05)
01:00.0 PCI bridge [0604]: Integrated Technology Express, Inc. Device [1283:8892] (rev 10)
03:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
04:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04)
== END lspci -nn ==

== BEGIN lsusb ==
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
== END lsusb ==

== BEGIN ifconfig -a ==
eth0 Link encap:Ethernet HWaddr E0:69:95:C8:B5:BE
inet addr:XXX.XXX.60.114 Bcast:XXX.XXX.60.119 Mask:255.255.255.248
inet6 addr: fe80::e269:95ff:fec8:b5be/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2260234 errors:0 dropped:0 overruns:0 frame:0
TX packets:1943726 errors:858 dropped:0 overruns:0 carrier:861
collisions:1692 txqueuelen:1000
RX bytes:2420724491 (2.2 GiB) TX bytes:240284707 (229.1 MiB)
Interrupt:20 Memory:fe600000-fe620000

eth1 Link encap:Ethernet HWaddr 00:1B:21:C6:D2:5C
inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::21b:21ff:fec6:d25c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1622087 errors:0 dropped:0 overruns:0 frame:0
TX packets:2452811 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:204733763 (195.2 MiB) TX bytes:2693614261 (2.5 GiB)
Interrupt:17 Memory:fe5c0000-fe5e0000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:3355 errors:0 dropped:0 overruns:0 frame:0
TX packets:3355 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1695570 (1.6 MiB) TX bytes:1695570 (1.6 MiB)

== END ifconfig -a ==

== BEGIN route -n ==
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
XXX.XXX.60.112 0.0.0.0 255.255.255.248 U 0 0 0 eth0
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 1003 0 0 eth1
0.0.0.0 200.205.60.113 0.0.0.0 UG 0 0 0 eth0
== END route -n ==

== BEGIN cat /etc/resolv.conf ==
; generated by /sbin/dhclient-script
nameserver 208.67.222.222
nameserver 208.67.220.220
== END cat /etc/resolv.conf ==

== BEGIN grep net /etc/nsswitch.conf ==
#networks: nisplus [NOTFOUND=return] files
#netmasks: nisplus [NOTFOUND=return] files
netmasks: files
networks: files
netgroup: nisplus
== END grep net /etc/nsswitch.conf ==

== BEGIN chkconfig --list | grep -Ei 'network|wpa' ==
NetworkManager 0:off 1:off 2:on 3:off 4:on 5:off 6:off
network 0:off 1:off 2:off 3:on 4:off 5:on 6:off
wpa_supplicant 0:off 1:off 2:off 3:off 4:off 5:off 6:off
== END chkconfig --list | grep -Ei 'network|wpa' ==

[/code]

pschaff
Retired Moderator
Posts: 18276
Joined: 2006/12/13 20:15:34
Location: Tidewater, Virginia, North America
Contact:

Re: Problem with Intel 82579V and 82574L NIC.

Post by pschaff » 2011/12/31 01:54:10

It's not completely clear - are you using the [url=http://elrepo.org/tiki/kmod-e1000e]kmod-e1000e[/url] driver? If so a [url=http://elrepo.org/bugs/main_page.php]bug report[/url] seems to be in order.

User avatar
AlanBartlett
Forum Moderator
Posts: 9329
Joined: 2007/10/22 11:30:09
Location: ~/Earth/UK/England/Suffolk
Contact:

Re: Problem with Intel 82579V and 82574L NIC.

Post by AlanBartlett » 2011/12/31 22:17:00

A quick note to mention that the [url=http://elrepo.org/tiki/kmod-e1000e]kmod-e1000e[/url] package was updated, yesterday, to the very latest sources available from [i]Intel[/i].

Post Reply

Return to “CentOS 6 - Networking Support”