Old MacBook Pro 2007

Issues related to hardware problems
Post Reply
Krzyhoo
Posts: 4
Joined: 2020/03/19 22:28:49

Old MacBook Pro 2007

Post by Krzyhoo » 2020/03/19 22:49:38

Hi All,

I tried the first time to install CentOS 7 on my old MacBook pro, from late 2007 with Intel Core Duo 2.4GHz.
I downloaded a few version but neither would like to install.
In fact, I'm a beginner (not totally) and please take it into your consideration when you reply to my post ;)
Is there any chance to do it?
Which version I can install using my hardware? I prefer version 7 but maybe I need to use the older one?


Thank you and good luck to everyone!
K

User avatar
TrevorH
Forum Moderator
Posts: 29972
Joined: 2009/09/24 10:40:56
Location: Brighton, UK

Re: Old MacBook Pro 2007

Post by TrevorH » 2020/03/19 23:00:09

You'll need to give a lot more details about what you downloaded. How did you try to boot it? If it was from a USB stick then did you read our wiki article about how to create one (see my sig below)? What happened? Give exact descriptions of all the errors that you saw or what happened when you tried.

No point in trying CentOS 6 as that dies by the end of this year.
CentOS 6 will die in November 2020 - migrate sooner rather than later!
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 is dead, do not use it.
Full time Geek, part time moderator. Use the FAQ Luke

Krzyhoo
Posts: 4
Joined: 2020/03/19 22:28:49

Re: Old MacBook Pro 2007

Post by Krzyhoo » 2020/03/20 09:03:23

TrevorH wrote:
2020/03/19 23:00:09
You'll need to give a lot more details about what you downloaded. How did you try to boot it? If it was from a USB stick then did you read our wiki article about how to create one (see my sig below)? What happened? Give exact descriptions of all the errors that you saw or what happened when you tried.

No point in trying CentOS 6 as that dies by the end of this year.
Thank you very very much for your replay!!!

I tried with CentOS-7-x86_64-DVD-1908.iso, boot from a USB stick and first of all, had a problem with picking disk on which CentOS may be installed.
Every try I had info there is no free space on the disk (this disk was totally empty, 500GB). There was a problem with saving boot loader on the disk too.
How should I format the hdd disk? GPT or MBR? Should I partition disk myself or installer will do it for me?
Once when something happened and installation allows me to went further appear announcement info that there is missing mactel-boot, I found it and downloaded but don't know how to add to the installation.
So, in theoretical, I finished an installation but my mac won’t start itself with CentOS system.

I tried with version 8 of CentOS but in fact, had exactly the same problems and final.

If it will be helpful to understand what is happening and what I’m doing wrong I could try one more time to make installation and take picture from my screen.

All the best
Krzysztof

Krzyhoo
Posts: 4
Joined: 2020/03/19 22:28:49

Re: Old MacBook Pro 2007

Post by Krzyhoo » 2020/03/24 15:54:34

Version 7 boots for so long so these screens are from the installation of CentoOS 8 version,
which goes smoothly but with the same troubles and ... without success:?

http://www.houseofretouching.com/wp-con ... entOS1.jpg
http://www.houseofretouching.com/wp-con ... entOS1.jpg
http://www.houseofretouching.com/wp-con ... entOS3.jpg
http://www.houseofretouching.com/wp-con ... entOS4.jpg
http://www.houseofretouching.com/wp-con ... myself.jpg
http://www.houseofretouching.com/wp-con ... _table.jpg
http://www.houseofretouching.com/wp-con ... entOS7.jpg
http://www.houseofretouching.com/wp-con ... entOS8.jpg
http://www.houseofretouching.com/wp-con ... entOS9.jpg

I used fdisk and created GPT partition, left it empty, without success, try to built partition by my self, without success, I don't know what else I could do, what wrong I did, please, help me and give me some advice...

Thank you!

Post Reply

Return to “CentOS 7 - Hardware Support”