i have a Centos7 server (lastest patches as of today) running on a hardware server.
i've installed NTP and enabled it to start at boot by running:
systemctl enable ntpd
the service will not turn on during boot, but if i manually start it via "systemctl start ntpd" it works fine.
i've heard of ntpd and ntpdate conflicting, so i made sure that ntpdate is not running "systemctl stop ntpdate" "systemctl disable ntpdate"
after a reboot, i see these logs:
Code: Select all
journalctl -b | grep ntpd
Jul 18 16:36:46 #hostname# systemd[1]: Looking at job ntpd.service/start conflicted_by=no
Jul 18 16:36:46 #hostname# systemd[1]: Fixing conflicting jobs ntpd.service/stop,ntpd.service/start by deleting job ntpd.service/start
Code: Select all
systemctl status ntpd
Loaded: loaded (/etc/systemd/system/ntpd.service; enabled; vendor preset: disabled)
Drop-In: /etc/systemd/system/ntpd.service.d
└─override.conf
Active: inactive (dead)
Code: Select all
cat /var/log/messages | grep ntpd
Jul 18 13:19:45 #hostname# ntpd[11765]: proto: precision = 0.095 usec
Jul 18 13:19:45 #hostname# ntpd[11765]: 0.0.0.0 c01d 0d kern kernel time sync enabled
Jul 18 13:19:45 #hostname# ntpd[11765]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
Jul 18 13:19:45 #hostname# ntpd[11765]: Listen and drop on 1 v6wildcard :: UDP 123
Jul 18 13:19:45 #hostname# ntpd[11765]: Listen normally on 2 lo 127.0.0.1 UDP 123
Jul 18 13:19:45 #hostname# ntpd[11765]: Listen normally on 6 team0 192.168.0.10 UDP 123
Jul 18 13:19:45 #hostname# ntpd[11765]: Listening on routing socket on fd #23 for interface updates
Jul 18 13:19:45 #hostname# ntpd[11765]: 0.0.0.0 c016 06 restart
Jul 18 13:19:45 #hostname# ntpd[11765]: 0.0.0.0 c012 02 freq_set kernel 10.213 PPM
Jul 18 13:19:46 #hostname# ntpd[11765]: 0.0.0.0 c615 05 clock_sync
i'm open to ideas or troubleshooting tips
thanks for taking the time.