Help! CentOS 7.5 Install issues

Issues related to hardware problems
Post Reply
yonit
Posts: 3
Joined: 2019/09/17 13:24:36

Help! CentOS 7.5 Install issues

Post by yonit » 2019/09/17 18:16:55

I have this that is unique to me that I'd like some help please. I have been trying to install a STIG'ed image of CentOS 7.5 to a Dell Precision 5820 tower and after the installation, I get these error during reboot.
47. 431196] dracut-pre-pivot[601]: modprobe: FATAL: Module sha1 not found.
47.835495] dracut: FATAL: FIPS integrity test failed
47.835588] dracut: Refusing to continue
47.859316] dracut-pre-pivot[601]: Warning: /boot/.vmlinuz-3.10.0-862.el7.x86_64.hmac does not exist
47. 791005] Dracut: FATAL: FIPS integrity test failed
48. 568172] System halted

The system doesn't fully boot; I have tried to go to the single user mode to disable FIPS however still have not work. I want to mention that I have successfully installed this same image in another Dell Precision 5820 with no issues. I am not finding much help on the internet; any help will be greatly appreciated.
Thank you

yonit

bowwave2000
Posts: 1
Joined: 2019/09/28 21:08:02

Re: Help! CentOS 7.5 Install issues

Post by bowwave2000 » 2019/09/28 21:09:22

I'm having the same problem. Only difference is that it complains about sha256 also.

User avatar
toracat
Site Admin
Posts: 7518
Joined: 2006/09/03 16:37:24
Location: California, US
Contact:

Re: Help! CentOS 7.5 Install issues

Post by toracat » 2019/09/29 00:17:21

Any reason to install CentOS 7.5? The current version is 7.7 and that is the only one supported here.
CentOS Forum FAQ

pjsr2
Posts: 614
Joined: 2014/03/27 20:11:07

Re: Help! CentOS 7.5 Install issues

Post by pjsr2 » 2019/10/07 19:36:26

The Dell Precision 5820 came on the market Jan 2108. CenOS-7.5 was released shortly after that date.
It could be that the hardware is to new to be supported in 7.5. Try the latest version.

User avatar
jlehtone
Posts: 4523
Joined: 2007/12/11 08:17:33
Location: Finland

Re: Help! CentOS 7.5 Install issues

Post by jlehtone » 2019/10/08 14:54:58

yonit wrote:
2019/09/17 18:16:55
STIG'ed image
If that means https://en.wikipedia.org/wiki/Security_ ... tion_Guide
which says: "STIGs also describe maintenance processes such as software updates and vulnerability patching."
then there is a logical conflict: "patched and up to date" vs "7.5 image".

yonit
Posts: 3
Joined: 2019/09/17 13:24:36

Re: Help! CentOS 7.5 Install issues

Post by yonit » 2019/10/17 19:02:20

This is is resolved. I edited the image file and removed nouveau from the grub file. Also run the grub2-mkconfig and the system installed and came up just fine. Thanks to everyone for your contribution.

Post Reply