TrevorH wrote: ↑2019/08/14 15:12:52
Read your logs, probably /var/log/Xorg.*.log but also look in messages and secure for clues.
I just installed the 3 xrdp packages and rebooted my VM and it still works.
Thanks for your help!
This is my /var/log/Xorg.9.log (other logs are too old). This file ends with several lines of UnloadModule: "evdev" (as follows).
(But I don't know whether this is the one I'm looking for, because its last-modified time is not the latest.)
Code: Select all
[ 27.228]
X.Org X Server 1.17.2
Release Date: 2015-06-16
[ 27.228] X Protocol Version 11, Revision 0
[ 27.228] Build Operating System: 2.6.32-220.17.1.el6.x86_64
[ 27.228] Current Operating System: Linux sna2.thu 3.10.0-327.el7.x86_64 #1 SMP Thu Nov 19 22:10:57 UTC 2015 x86_64
[ 27.228] Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.0-327.el7.x86_64 root=/dev/mapper/centos-root ro crashkernel=auto rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb quiet LANG=en_US.UTF-8
[ 27.228] Build Date: 20 November 2015 02:44:25PM
[ 27.228] Build ID: xorg-x11-server 1.17.2-10.el7
[ 27.234] Current version of pixman: 0.32.6
[ 27.234] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 27.238] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 27.238] (==) Log file: "/var/log/Xorg.9.log", Time: Tue Sep 20 21:44:25 2016
[ 27.449] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 27.449] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 27.513] (==) No Layout section. Using the first Screen section.
[ 27.515] (==) No screen section available. Using defaults.
[ 27.515] (**) |-->Screen "Default Screen Section" (0)
[ 27.515] (**) | |-->Monitor "<default monitor>"
[ 27.540] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 27.540] (==) Automatically adding devices
[ 27.540] (==) Automatically enabling devices
[ 27.540] (==) Automatically adding GPU devices
[ 27.540] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[ 27.540] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 27.540] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 27.548] (II) Loader magic: 0x7fc4a0947020
[ 27.548] (II) Module ABI versions:
[ 27.548] X.Org ANSI C Emulation: 0.4
[ 27.548] X.Org Video Driver: 19.0
[ 27.548] X.Org XInput driver : 21.0
[ 27.548] X.Org Server Extension : 9.0
[ 27.560] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 27.704] (--) PCI:*(0:11:0:0) 1a03:2000:1043:84eb rev 33, Mem @ 0xce000000/16777216, 0xcf000000/131072, I/O @ 0x00006000/128, BIOS @ 0x????????/131072
[ 27.719] (II) LoadModule: "glx"
[ 27.730] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 28.030] (II) Module glx: vendor="X.Org Foundation"
[ 28.030] compiled for 1.17.2, module version = 1.0.0
[ 28.030] ABI class: X.Org Server Extension, version 9.0
[ 28.030] (==) AIGLX enabled
[ 28.031] (==) Matched modesetting as autoconfigured driver 0
[ 28.031] (==) Matched fbdev as autoconfigured driver 1
[ 28.031] (==) Matched vesa as autoconfigured driver 2
[ 28.031] (==) Assigned the driver to the xf86ConfigLayout
[ 28.031] (II) LoadModule: "modesetting"
[ 28.031] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 28.049] (II) Module modesetting: vendor="X.Org Foundation"
[ 28.049] compiled for 1.17.2, module version = 1.17.2
[ 28.049] Module class: X.Org Video Driver
[ 28.049] ABI class: X.Org Video Driver, version 19.0
[ 28.051] (II) LoadModule: "fbdev"
[ 28.051] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 28.072] (II) Module fbdev: vendor="X.Org Foundation"
[ 28.072] compiled for 1.17.2, module version = 0.4.3
[ 28.072] Module class: X.Org Video Driver
[ 28.072] ABI class: X.Org Video Driver, version 19.0
[ 28.072] (II) LoadModule: "vesa"
[ 28.072] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 28.093] (II) Module vesa: vendor="X.Org Foundation"
[ 28.093] compiled for 1.17.2, module version = 2.3.2
[ 28.093] Module class: X.Org Video Driver
[ 28.093] ABI class: X.Org Video Driver, version 19.0
[ 28.093] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 28.093] (II) FBDEV: driver for framebuffer: fbdev
[ 28.093] (II) VESA: driver for VESA chipsets: vesa
[ 28.093] (--) using VT number 2
[ 28.206] (**) modeset(0): claimed PCI slot 11@0:0:0
[ 28.206] (II) modeset(0): using default device
[ 28.206] (WW) Falling back to old probe method for fbdev
[ 28.206] (II) Loading sub module "fbdevhw"
[ 28.206] (II) LoadModule: "fbdevhw"
[ 28.206] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 28.226] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 28.226] compiled for 1.17.2, module version = 0.0.2
[ 28.226] ABI class: X.Org Video Driver, version 19.0
[ 28.226] (WW) Falling back to old probe method for vesa
[ 28.230] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 28.230] (==) modeset(0): Depth 24, (--) framebuffer bpp 32
[ 28.230] (==) modeset(0): RGB weight 888
[ 28.230] (==) modeset(0): Default visual is TrueColor
[ 28.230] (II) Loading sub module "glamoregl"
[ 28.230] (II) LoadModule: "glamoregl"
[ 28.231] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
[ 28.463] (II) Module glamoregl: vendor="X.Org Foundation"
[ 28.463] compiled for 1.17.2, module version = 1.0.0
[ 28.463] ABI class: X.Org ANSI C Emulation, version 0.4
[ 28.469] (II) glamor: OpenGL accelerated X.org driver based.
[ 29.697] (II) glamor: EGL version 1.4 (DRI2):
[ 29.697] EGL_MESA_drm_image required.
[ 29.697] (EE) modeset(0): glamor initialization failed
[ 29.697] (II) modeset(0): ShadowFB: preferred YES, enabled YES
[ 29.697] (II) modeset(0): Double-buffered shadow updates: on(II) modeset(0): Output VGA-0 has no monitor section
[ 29.893] (II) modeset(0): EDID for output VGA-0
[ 29.893] (II) modeset(0): Manufacturer: KVM Model: 4308 Serial#: 16843015
[ 29.893] (II) modeset(0): Year: 2005 Week: 10
[ 29.893] (II) modeset(0): EDID Version: 1.3
[ 29.893] (II) modeset(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 29.893] (II) modeset(0): Sync: Separate
[ 29.893] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 29.893] (II) modeset(0): Gamma: 2.20
[ 29.893] (II) modeset(0): DPMS capabilities: Off; RGB/Color Display
[ 29.893] (II) modeset(0): First detailed timing is preferred mode
[ 29.893] (II) modeset(0): redX: 0.630 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 29.893] (II) modeset(0): blueX: 0.150 blueY: 0.100 whiteX: 0.310 whiteY: 0.330
[ 29.893] (II) modeset(0): Supported established timings:
[ 29.893] (II) modeset(0): 720x400@70Hz
[ 29.893] (II) modeset(0): 640x480@60Hz
[ 29.893] (II) modeset(0): 640x480@67Hz
[ 29.893] (II) modeset(0): 640x480@72Hz
[ 29.893] (II) modeset(0): 640x480@75Hz
[ 29.893] (II) modeset(0): 800x600@56Hz
[ 29.893] (II) modeset(0): 800x600@60Hz
[ 29.893] (II) modeset(0): 800x600@72Hz
[ 29.893] (II) modeset(0): 800x600@75Hz
[ 29.893] (II) modeset(0): 832x624@75Hz
[ 29.893] (II) modeset(0): 1024x768@60Hz
[ 29.893] (II) modeset(0): 1024x768@70Hz
[ 29.893] (II) modeset(0): 1024x768@75Hz
[ 29.893] (II) modeset(0): 1280x1024@75Hz
[ 29.893] (II) modeset(0): 1152x864@75Hz
[ 29.893] (II) modeset(0): Manufacturer's mask: 0
[ 29.893] (II) modeset(0): Supported standard timings:
[ 29.893] (II) modeset(0): #0: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 29.893] (II) modeset(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 29.893] (II) modeset(0): #2: hsize: 1280 vsize 960 refresh: 70 vid: 19073
[ 29.893] (II) modeset(0): #3: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
[ 29.893] (II) modeset(0): Supported detailed timing:
[ 29.893] (II) modeset(0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 29.893] (II) modeset(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 29.893] (II) modeset(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 29.893] (II) modeset(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 80 kHz, PixClock max 145 MHz
[ 29.893] (II) modeset(0): Monitor name: LCD Monitor 1
[ 29.893] (II) modeset(0): Monitor name: 7"
[ 29.893] (II) modeset(0): EDID (in hex):
[ 29.893] (II) modeset(0): 00ffffffffffff002ecd084307010101
[ 29.893] (II) modeset(0): 0a0f010308221b782a6ea6a1544c9926
[ 29.893] (II) modeset(0): 194f54bfef808140714f814a81990101
[ 29.893] (II) modeset(0): 010101010101302a009851002a403070
[ 29.893] (II) modeset(0): 1300520e1100001e000000fd00324b1e
[ 29.893] (II) modeset(0): 500e313033303830390a000000fc004c
[ 29.893] (II) modeset(0): 4344204d6f6e69746f722031000000fc
[ 29.893] (II) modeset(0): 0037220a20202020202020202020002b
[ 29.901] (II) modeset(0): Not using mode "1280x1024" (bad mode clock/interlace/doublescan)
[ 29.901] (II) modeset(0): Printing probed modes for output VGA-0
[ 29.901] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 29.901] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 29.901] (II) modeset(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 29.901] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 29.901] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 29.901] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 29.901] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 29.901] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 29.901] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 29.901] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 29.901] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 29.901] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 29.901] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 29.901] (II) modeset(0): Output VGA-0 connected
[ 29.903] (II) modeset(0): Using exact sizes for initial modes
[ 29.903] (II) modeset(0): Output VGA-0 using initial mode 1280x1024 +0+0
[ 29.903] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 29.903] (==) modeset(0): DPI set to (96, 96)
[ 29.903] (II) Loading sub module "fb"
[ 29.903] (II) LoadModule: "fb"
[ 29.903] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 29.910] (II) Module fb: vendor="X.Org Foundation"
[ 29.910] compiled for 1.17.2, module version = 1.0.0
[ 29.910] ABI class: X.Org ANSI C Emulation, version 0.4
[ 29.910] (II) Loading sub module "shadow"
[ 29.910] (II) LoadModule: "shadow"
[ 29.910] (II) Loading /usr/lib64/xorg/modules/libshadow.so
[ 29.916] (II) Module shadow: vendor="X.Org Foundation"
[ 29.916] compiled for 1.17.2, module version = 1.1.0
[ 29.916] ABI class: X.Org ANSI C Emulation, version 0.4
[ 29.916] (II) UnloadModule: "fbdev"
[ 29.916] (II) Unloading fbdev
[ 29.916] (II) UnloadSubModule: "fbdevhw"
[ 29.916] (II) Unloading fbdevhw
[ 29.916] (II) UnloadModule: "vesa"
[ 29.916] (II) Unloading vesa
[ 29.925] (==) Depth 24 pixmap format is 32 bpp
[ 29.950] (==) modeset(0): Backing store enabled
[ 29.950] (==) modeset(0): Silken mouse enabled
[ 29.955] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 29.975] (==) modeset(0): DPMS enabled
[ 30.790] (--) RandR disabled
[ 30.830] (II) SELinux: Disabled by boolean
[ 30.838] (II) AIGLX: Screen 0 is not DRI2 capable
[ 30.838] (EE) AIGLX: reverting to software rendering
[ 30.865] (II) AIGLX: Loaded and initialized swrast
[ 30.865] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 30.871] (II) modeset(0): Setting screen physical size to 338 x 270
[ 31.581] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 31.582] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 31.582] (**) Power Button: Applying InputClass "system-keyboard"
[ 31.582] (II) LoadModule: "evdev"
[ 31.582] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 31.647] (II) Module evdev: vendor="X.Org Foundation"
[ 31.647] compiled for 1.17.2, module version = 2.9.2
[ 31.647] Module class: X.Org XInput Driver
[ 31.647] ABI class: X.Org XInput driver, version 21.0
[ 31.647] (II) Using input driver 'evdev' for 'Power Button'
[ 31.647] (**) Power Button: always reports core events
[ 31.647] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 31.647] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 31.647] (--) evdev: Power Button: Found keys
[ 31.647] (II) evdev: Power Button: Configuring as keyboard
[ 31.648] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 31.648] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 31.648] (**) Option "xkb_rules" "evdev"
[ 31.648] (**) Option "xkb_layout" "us"
[ 31.656] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 31.656] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 31.656] (**) Power Button: Applying InputClass "system-keyboard"
[ 31.656] (II) Using input driver 'evdev' for 'Power Button'
[ 31.656] (**) Power Button: always reports core events
[ 31.656] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 31.657] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 31.657] (--) evdev: Power Button: Found keys
[ 31.657] (II) evdev: Power Button: Configuring as keyboard
[ 31.657] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 31.657] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 31.657] (**) Option "xkb_rules" "evdev"
[ 31.657] (**) Option "xkb_layout" "us"
[ 31.658] (II) config/udev: Adding input device HID 04d9:1400 (/dev/input/event2)
[ 31.658] (**) HID 04d9:1400: Applying InputClass "evdev keyboard catchall"
[ 31.658] (**) HID 04d9:1400: Applying InputClass "system-keyboard"
[ 31.658] (II) Using input driver 'evdev' for 'HID 04d9:1400'
[ 31.658] (**) HID 04d9:1400: always reports core events
[ 31.658] (**) evdev: HID 04d9:1400: Device: "/dev/input/event2"
[ 31.658] (--) evdev: HID 04d9:1400: Vendor 0x4d9 Product 0x1400
[ 31.658] (--) evdev: HID 04d9:1400: Found keys
[ 31.658] (II) evdev: HID 04d9:1400: Configuring as keyboard
[ 31.658] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.0/input/input2/event2"
[ 31.658] (II) XINPUT: Adding extended input device "HID 04d9:1400" (type: KEYBOARD, id 8)
[ 31.658] (**) Option "xkb_rules" "evdev"
[ 31.658] (**) Option "xkb_layout" "us"
[ 31.658] (II) config/udev: Adding input device HID 04d9:1400 (/dev/input/event3)
[ 31.658] (**) HID 04d9:1400: Applying InputClass "evdev pointer catchall"
[ 31.658] (**) HID 04d9:1400: Applying InputClass "evdev keyboard catchall"
[ 31.658] (**) HID 04d9:1400: Applying InputClass "system-keyboard"
[ 31.658] (II) Using input driver 'evdev' for 'HID 04d9:1400'
[ 31.658] (**) HID 04d9:1400: always reports core events
[ 31.658] (**) evdev: HID 04d9:1400: Device: "/dev/input/event3"
[ 31.659] (--) evdev: HID 04d9:1400: Vendor 0x4d9 Product 0x1400
[ 31.659] (--) evdev: HID 04d9:1400: Found 9 mouse buttons
[ 31.659] (--) evdev: HID 04d9:1400: Found scroll wheel(s)
[ 31.659] (--) evdev: HID 04d9:1400: Found relative axes
[ 31.659] (--) evdev: HID 04d9:1400: Found x and y relative axes
[ 31.659] (--) evdev: HID 04d9:1400: Found keys
[ 31.659] (II) evdev: HID 04d9:1400: Configuring as mouse
[ 31.659] (II) evdev: HID 04d9:1400: Configuring as keyboard
[ 31.659] (II) evdev: HID 04d9:1400: Adding scrollwheel support
[ 31.659] (**) evdev: HID 04d9:1400: YAxisMapping: buttons 4 and 5
[ 31.659] (**) evdev: HID 04d9:1400: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 31.659] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.1/input/input3/event3"
[ 31.659] (II) XINPUT: Adding extended input device "HID 04d9:1400" (type: KEYBOARD, id 9)
[ 31.659] (**) Option "xkb_rules" "evdev"
[ 31.659] (**) Option "xkb_layout" "us"
[ 31.665] (II) evdev: HID 04d9:1400: initialized for relative axes.
[ 31.665] (**) HID 04d9:1400: (accel) keeping acceleration scheme 1
[ 31.665] (**) HID 04d9:1400: (accel) acceleration profile 0
[ 31.665] (**) HID 04d9:1400: (accel) acceleration factor: 2.000
[ 31.665] (**) HID 04d9:1400: (accel) acceleration threshold: 4
[ 31.665] (II) config/udev: Adding input device HID 04d9:1400 (/dev/input/mouse0)
[ 31.665] (**) HID 04d9:1400: Applying InputClass "system-keyboard"
[ 31.665] (II) No input driver specified, ignoring this device.
[ 31.665] (II) This device may have been added with another device file.
[ 31.665] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 31.665] (II) No input driver specified, ignoring this device.
[ 31.665] (II) This device may have been added with another device file.
[ 68.477] (II) evdev: HID 04d9:1400: Close
[ 68.477] (II) UnloadModule: "evdev"
[ 68.477] (II) evdev: HID 04d9:1400: Close
[ 68.477] (II) UnloadModule: "evdev"
[ 68.477] (II) evdev: Power Button: Close
[ 68.477] (II) UnloadModule: "evdev"
[ 68.477] (II) evdev: Power Button: Close
[ 68.477] (II) UnloadModule: "evdev"
[ 68.644] (II) Server terminated successfully (0). Closing log file.
Actually I have already google these messages before and got some options, but none of them worked for my case.
I also tried to start X (root user) to produce the latest log, but failed.
Code: Select all
# X
X: symbol lookup error: X: undefined symbol: drmFreeDevice
Another trial also failed. It shows:
Code: Select all
# startx
xauth: file /root/.serverauth.13167does not exist
/usr/bin/X: symbol lookup error: /usr/bin/X: undefined symbol: drmFreeDevice
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
I googled the message and found a suggestion: "ldd /usr/bin/X", but also failed:
Code: Select all
# ldd /usr/bin/X
not a dynamic executable
My Linux kernel is:
Code: Select all
# uname -a
Linux sna2.thu 3.10.0-327.el7.x86_64 #1 SMP Thu Nov 19 22:10:57 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
Here are my Xorg config file.
/etc/X11/xorg.conf.d/libvnc.conf is all comments.
/etc/X11/xorg.conf.d/00-keyboard.conf:
Code: Select all
# Read and parsed by systemd-localed. It's probably wise not to edit this file
# manually too freely.
Section "InputClass"
Identifier "system-keyboard"
MatchIsKeyboard "on"
Option "XkbLayout" "us"
EndSection
I really have no idea now. Any help is appreciated. Thanks!