I am trying to install Centos 7 (1810) and it keeps crashing a few seconds into the install process, resulting in a machine restart.
I have managed an install on this machine previously using an HD2600 card without problems. However, I'm now using Geforce GT 710. The graphics card is the only difference.
I can't read the messages on screen as they scroll by too fast before the crash.
The hardware is:
Ryzen 1700
Asus B450M-PLUS
Single SATA SSD
Gefore GT 710
The BIOS is updated to the latest release.
Any help / ideas on how to proceed with this would be appreciated.?
Centos 7 crash during install / GT 710
Re: Centos 7 crash during install / GT 710
Not sure about the Ryzen CPU but..
When I installed on a Intel Core 7 and CentOS install the nouveau driver my machine would not stay up until I moved to the nVidia driver.
Hope this helps...
Gene
When I installed on a Intel Core 7 and CentOS install the nouveau driver my machine would not stay up until I moved to the nVidia driver.
Hope this helps...
Gene
Happily Retired
Gene Poole
Woodstock, Georgia
Gene Poole
Woodstock, Georgia
-
- Posts: 3
- Joined: 2017/03/26 13:48:53
Re: Centos 7 crash during install / GT 710
Unfortunately I can't event get a basic install performed. The installer crashes almost immediately.
I've tried various options e.g. nomodeset etc but nothing helps.
A text only installer for Ubuntu server works ok though - obviously something to do with the video card.
I've tried various options e.g. nomodeset etc but nothing helps.
A text only installer for Ubuntu server works ok though - obviously something to do with the video card.
- WhatsHisName
- Posts: 1549
- Joined: 2005/12/19 20:21:43
- Location: /earth/usa/nj
Re: Centos 7 crash during install / GT 710
Had trouble installing el 7.6 on similar hardware (i.e., it would NOT install), but el 7.5 installed without problems followed by updating to el 7.6.
My suggestion is to try installing from the el 7.5 DVD.
Also, it will run better on elrepo kernel-ml until el8 is out. Stock kernel almost always hangs on shutdown plus other annoying issues, but it will run the system.
Code: Select all
# dmidecode|grep Ryzen
Version: AMD Ryzen Threadripper 2950X 16-Core Processor
# lspci -nn|grep -i vga
41:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK208B [GeForce GT 710] [10de:128b] (rev a1)
# lsmod|grep ^nouveau
nouveau 1839104 1
# cat /etc/redhat-release
Red Hat Enterprise Linux Server release 7.6 (Maipo)
Also, it will run better on elrepo kernel-ml until el8 is out. Stock kernel almost always hangs on shutdown plus other annoying issues, but it will run the system.
Re: Centos 7 crash during install / GT 710
Goodness Me!
I should have mentioned that also. Tried to install 1810 4 times with no luck. Used a 1708 DVD and it installed perfectly the first time with no issues. Blacklisted nouveau in the blacklist.conf and the grub2 kernel cmdline. Installed the nVidia driver with no issues. Since I use the command line 95% of the time I also added the parm vga=ask to the kernel command line to get a display I liked. Once I get a display I liked I had to update the kernel command line one more time - i.e. vga=0x31b. Do the grub2-mkconfig one last time.
Also don't forget to install dkms so you don't have to rebuild the nVidia kernel module everytime the kernel is updated.
Gene
I should have mentioned that also. Tried to install 1810 4 times with no luck. Used a 1708 DVD and it installed perfectly the first time with no issues. Blacklisted nouveau in the blacklist.conf and the grub2 kernel cmdline. Installed the nVidia driver with no issues. Since I use the command line 95% of the time I also added the parm vga=ask to the kernel command line to get a display I liked. Once I get a display I liked I had to update the kernel command line one more time - i.e. vga=0x31b. Do the grub2-mkconfig one last time.
Also don't forget to install dkms so you don't have to rebuild the nVidia kernel module everytime the kernel is updated.
Gene
Happily Retired
Gene Poole
Woodstock, Georgia
Gene Poole
Woodstock, Georgia
Re: Centos 7 crash during install / GT 710
OK I know EXACTLY what your problem is as I have had the EXACT SAME THING happen. Without knowing anything about your setup the problem is that CentOS is looking for a Legacy BIOS install, yet the DEFAULT is UEFI. Thus the UEFI is what the installer DEFAULTS to, while CentOS is looking for a Legacy BIOS install. Usually with most motherboards the user can either leave it as UEFI -- the DEFAULT for Windows -- or you can set it to Legacy BIOS. With ASUS motherboards when you enter BIOS you can either select from a UEFI device -- such as a DVD/CD-ROM or you can select the same device but is Non-UEFI. If you select the Non-UEFI device and then do the install it will run right on through the install; leave it as a UEFI device it will comeback can give you an error message. To see what it is defaulting to, enter BIOS -- the first item (usually a DVD or CD-ROM looking device) on the far left side is the first BOOT device followed by a HD looking device, etc. This is the boot load order. To change the order -- usually on the far right side -- is the same DVD/CD-ROM looking device usually without the UEFI emblazed on top of it. Select the Non-UEFI device, Click and HOLD on it and drag it to the far left side in front of the UEFI device. I usually then follow it selecting the Non-UEFI HD etc. Save and re-boot and be on your merry way with your install.n4200linux wrote: ↑2019/03/22 00:15:28Unfortunately I can't event get a basic install performed. The installer crashes almost immediately.
I've tried various options e.g. nomodeset etc but nothing helps.
A text only installer for Ubuntu server works ok though - obviously something to do with the video card.