Add kmod RAID driver in Centos 7 installer for HP Proliant
Re: How to add kmod RAID driver at install time for Proliant
We are still in the testing phase. Unlike our "regular" packages, ddisk iso files will not be in our usual repositories.
Whether it works under EL7.1 will depend on the driver's compatibility. If it needs to be rebuilt against the newer kernel, the iso has to be rebuilt. So we will see.
Whether it works under EL7.1 will depend on the driver's compatibility. If it needs to be rebuilt against the newer kernel, the iso has to be rebuilt. So we will see.
CentOS Forum FAQ
Re: How to add kmod RAID driver at install time for Proliant
How it works (for future reference):
-first burn the .iso image on an USB stick using the dd command - use with caution!
-then start the installer from a CD, or USB, or from the network;
-at the very first screen, the one with the options to Install, Check disk and install, Troubleshoot or something like that (the one with the countdown) just hit ESC;
-insert the USB memory stick in a port;
-you will get a prompt; type here "linux dd" without the quotes, hit enter and wait a while;
-select your USB drive, which probably will be "sda" so press "1" or press the according number;
-next select the driver by pressing "1";
-press "c (continue)" and now it will tell you that it is loading the driver;
-you will get back to some weird screen with some more options, probably to continue loading other drivers - just press "c" one more time;
-the installer will start, and you will get your disks (previously configured in the HP utility) in the "Specialized and Network Disks > Add a disk" area.
Enjoy your CentOS 7!
-first burn the .iso image on an USB stick using the dd command - use with caution!
-then start the installer from a CD, or USB, or from the network;
-at the very first screen, the one with the options to Install, Check disk and install, Troubleshoot or something like that (the one with the countdown) just hit ESC;
-insert the USB memory stick in a port;
-you will get a prompt; type here "linux dd" without the quotes, hit enter and wait a while;
-select your USB drive, which probably will be "sda" so press "1" or press the according number;
-next select the driver by pressing "1";
-press "c (continue)" and now it will tell you that it is loading the driver;
-you will get back to some weird screen with some more options, probably to continue loading other drivers - just press "c" one more time;
-the installer will start, and you will get your disks (previously configured in the HP utility) in the "Specialized and Network Disks > Add a disk" area.
Enjoy your CentOS 7!
Don't take the name of root in vain!
Re: How to add kmod RAID driver at install time for Proliant
Presumably once the install is done, it lists kmod-cciss as an installed rpm so it will be updated when (if) this package is revised at ELRepo?
The future appears to be RHEL or Debian. I think I'm going Debian.
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke
Re: Add kmod RAID driver in Centos 7 installer for HP Prolia
Works beautifully on a DL360 G5 with an E200i. The disks are now recognized without the need to specify hpsa kernel parameters. I am going to reinstall one of these evenings. Thanks!
Update: Installed yesterday (20150308). I had to add the kmod-cciss module from ELRepo and it booted without problems even after a complete update. The new kernel is still the same version, though.
Update: Installed yesterday (20150308). I had to add the kmod-cciss module from ELRepo and it booted without problems even after a complete update. The new kernel is still the same version, though.
Root is evil: Do not use root (sudo) to run any of the commands specified in my posts unless explicitly indicated. Please, provide the necessary amount of context to understand your problem/question.
Re: Add kmod RAID driver in Centos 7 installer for HP Prolia
I did got a kernel update - for me I can testify it worked fine. Glad you got it working!
Don't take the name of root in vain!
Re: Add kmod RAID driver in Centos 7 installer for HP Prolia
Hello again.
Toracat could you please release another image for the new CentOS 7.1? Thank you.
Toracat could you please release another image for the new CentOS 7.1? Thank you.
Don't take the name of root in vain!
Re: Add kmod RAID driver in Centos 7 installer for HP Prolia
Works like a charm Thanks a lot!
Root is evil: Do not use root (sudo) to run any of the commands specified in my posts unless explicitly indicated. Please, provide the necessary amount of context to understand your problem/question.
Re: Add kmod RAID driver in Centos 7 installer for HP Prolia
The iso file built against the EL-7.1 kernel (3.10.0-229.el7) has been uploaded:fakemoth wrote:Hello again.
Toracat could you please release another image for the new CentOS 7.1? Thank you.
http://elrepo.org/people/akemi/testing/el7/isos/
Please test. I believe the driver is backward compatible with EL 7.0.
CentOS Forum FAQ
Re: Add kmod RAID driver in Centos 7 installer for HP Prolia
Tested CentOS-7-x86_64-DVD-1503-01 with an E200i. I didn't go all the way as to reinstall, but I got to the point where you have to Add a Disk and my RAID configuration was right there. Once again, thanks a bunch, toracat.
P.S. With 7.0, it printed
and kept showing the 'Driver disk device selection' menu without presenting any driver choice.
P.S. With 7.0, it printed
Code: Select all
DD: Checking device /dev/sda
DD: Processing DD repo /media/DD//rpms/x86_64 on /dev/sda
Root is evil: Do not use root (sudo) to run any of the commands specified in my posts unless explicitly indicated. Please, provide the necessary amount of context to understand your problem/question.