DELL T40+PERC H710 - which version of CentOS to choose 7 or 8 Stream?
Re: DELL T40+PERC H710 - which version of CentOS to choose 7 or 8 Stream?
I'm just doing a second test.
I installed fresh CentOS 8 Stream.
I have access to the RAID controller via web gui. https:/ ip-address:1311
Then I choose CentOS 8 Stream.
It's a pity that on Debian 10 it cannot be run ...
I installed fresh CentOS 8 Stream.
I have access to the RAID controller via web gui. https:/ ip-address:1311
Then I choose CentOS 8 Stream.
It's a pity that on Debian 10 it cannot be run ...
Re: DELL T40+PERC H710 - which version of CentOS to choose 7 or 8 Stream?
To see smart info, you could try something like this:
smartctl --all -d megaraid,0 /dev/sda
My C7 system:
lspci -nn|grep -i raid
03:00.0 RAID bus controller [0104]: Broadcom / LSI MegaRAID SAS 2208 [Thunderbolt] [1000:005b] (rev 05)
PS: Not sure if anyone here would recommend Stream for
anything remotely critical. I have one C8 box which probably
will be converted to AlmaLinux later in the year (or one of
the other RHEL clones/rebuilds).
smartctl --all -d megaraid,0 /dev/sda
My C7 system:
lspci -nn|grep -i raid
03:00.0 RAID bus controller [0104]: Broadcom / LSI MegaRAID SAS 2208 [Thunderbolt] [1000:005b] (rev 05)
PS: Not sure if anyone here would recommend Stream for
anything remotely critical. I have one C8 box which probably
will be converted to AlmaLinux later in the year (or one of
the other RHEL clones/rebuilds).
Re: DELL T40+PERC H710 - which version of CentOS to choose 7 or 8 Stream?
I need this DELL T40 as a server at work.
As a CentOS system host. Here I hesitate between CentOS 7 and CentOS 8 Stream
VM01 - Debian with Librenms
VM02 - Debian with GLPI
VM03 - Windows 10 Pro
Will be more VM in the future...
As a CentOS system host. Here I hesitate between CentOS 7 and CentOS 8 Stream
VM01 - Debian with Librenms
VM02 - Debian with GLPI
VM03 - Windows 10 Pro
Will be more VM in the future...
Re: DELL T40+PERC H710 - which version of CentOS to choose 7 or 8 Stream?
I think Stream at best has been described as a rolling
prerelease of the next RHEL point release, in this case
RHEL 8.4. (Other people has described it as an alpha or
beta version of the next RHEL point release.) In either
case, I would believe you have to expect more bugs and
problems than if you select one of the clones/rebulds.
So I guess it depends on what you mean by "a server at
work".
prerelease of the next RHEL point release, in this case
RHEL 8.4. (Other people has described it as an alpha or
beta version of the next RHEL point release.) In either
case, I would believe you have to expect more bugs and
problems than if you select one of the clones/rebulds.
So I guess it depends on what you mean by "a server at
work".
Re: DELL T40+PERC H710 - which version of CentOS to choose 7 or 8 Stream?
Several people have recommended CentOS version 7 for the server because there are less problems with it.
Re: DELL T40+PERC H710 - which version of CentOS to choose 7 or 8 Stream?
The AlmaLinux could be a real option: https://almalinux.org/blog/almalinux-os ... e-is-live/
It ought to be almost like CentOS Linux 8. Not the Stream.
It ought to be almost like CentOS Linux 8. Not the Stream.
Re: DELL T40+PERC H710 - which version of CentOS to choose 7 or 8 Stream?
You need to use the StorCli to find out the DID of the physical drive is, something like
Then noting the DID and knowing the Linux device of the array on which the drive is connected
Code: Select all
storcli /c0 /vall show all
Code: Select all
smartctl -a -d megaraid,<DID> /dev/sda
Re: DELL T40+PERC H710 - which version of CentOS to choose 7 or 8 Stream?
storcli dont see my controller?jabuzzard wrote: ↑2021/04/23 21:56:49You need to use the StorCli to find out the DID of the physical drive is, something like
Then noting the DID and knowing the Linux device of the array on which the drive is connectedCode: Select all
storcli /c0 /vall show all
Code: Select all
smartctl -a -d megaraid,<DID> /dev/sda
Code: Select all
[root@host01 storcli]# ./storcli64 /c0 /vall show all
CLI Version = 007.1705.0000.0000 Mar 31, 2021
Operating system = Linux 3.10.0-1160.24.1.el7.x86_64
Controller = 0
Status = Failure
Description = Controller 0 not found
[root@host01 storcli]#
Code: Select all
[root@host01 storcli]# lspci | grep RAID
01:00.0 RAID bus controller: Broadcom / LSI MegaRAID SAS 2208 [Thunderbolt] (rev 05)
Code: Select all
[root@host01 storcli]# lspci | grep RAID
01:00.0 RAID bus controller: Broadcom / LSI MegaRAID SAS 2208 [Thunderbolt] (rev 05)
[root@host01 storcli]# lsscsi
[0:2:0:0] disk DELL PERC H710 3.13 /dev/sda
[2:0:0:0] cd/dvd HL-DT-ST DVD+-RW GU90N A1C3 /dev/sr0
[5:0:0:0] disk Seagate Expansion Desk 9401 /dev/sdb
Re: DELL T40+PERC H710 - which version of CentOS to choose 7 or 8 Stream?
My mistake it's perccli on a Dell machine, so if you have installed the perccli RPM then (turns out you don't need the /vall)
Just tested that on a PowerEdge R420 with a PERC H710 Mini
Code: Select all
/opt/MegaRAID/perccli/perccli64 /c0 show all
Re: DELL T40+PERC H710 - which version of CentOS to choose 7 or 8 Stream?
Code: Select all
root@torit01:~# /opt/MegaRAID/perccli/perccli64 /c0 show all
Generating detailed summary of the adapter, it may take a while to complete.
Segmentation fault