Cetos 8.2 does not detect hard disk during installation

Issues related to hardware problems
Post Reply
sbdcunha
Posts: 25
Joined: 2013/09/17 11:51:24

Cetos 8.2 does not detect hard disk during installation

Post by sbdcunha » 2020/10/26 07:53:01

Dears,

I have the below hardware

SUN BLADE X6270 SERVER MODULE 72 GB Ram

I am trying to install centos 8.2 64 Bit but my hard dis not being detected
centos 7 x64 has not issues

Apprecite your help and advice


regards

simon

tunk
Posts: 832
Joined: 2017/02/22 15:08:17

Re: Cetos 8.2 does not detect hard disk during installation

Post by tunk » 2020/10/26 10:55:44

What's your RAID card - it may not be supported in C8.

Edit: Run this on C7 and post the output here:
lspci -nn | grep -i raid

sbdcunha
Posts: 25
Joined: 2013/09/17 11:51:24

Re: Cetos 8.2 does not detect hard disk during installation

Post by sbdcunha » 2020/10/26 17:39:28

Dear Trunk,

Thanks for the immediate reply
heres the output of lspci command

------------------
lspci -nn | grep -i raid
01:00.0 RAID bus controller [0104]: Adaptec AAC-RAID [9005:0285] (rev 09)
----------------------


appreciate your help and advice


Regards

simon

User avatar
TrevorH
Forum Moderator
Posts: 29915
Joined: 2009/09/24 10:40:56
Location: Brighton, UK

Re: Cetos 8.2 does not detect hard disk during installation

Post by TrevorH » 2020/10/29 01:00:42

ELRepo have a kmod-aacraid for el8 that add back the missing support for this controller. Google for elrepo and also for 'driver update disk' as you'll need to supply one to the installer to get it to work.
CentOS 6 will die in November 2020 - migrate sooner rather than later!
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 is dead, do not use it.
Full time Geek, part time moderator. Use the FAQ Luke

Post Reply

Return to “CentOS 8 - Hardware Support”