Webcam not working

Issues related to hardware problems
Post Reply
User avatar
bluegroper
Posts: 247
Joined: 2005/09/07 23:04:21
Location: .au

Webcam not working

Post by bluegroper » 2020/03/29 23:29:53

Hi forum
I'm trying to do the "work from home" thing.
Found an old Logitech webcam amongst the spares. Trying to get the camera working in CentOS (with KDE/Plasma desktop)
When I plug in the Webcam, I gets the following in dmesg :
# dmesg
[1299279.060795] usb 2-1.1: new full-speed USB device number 24 using ehci-pci
[1299279.143105] usb 2-1.1: New USB device found, idVendor=046d, idProduct=08d9, bcdDevice= 1.00
[1299279.143109] usb 2-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[1299279.143466] gspca_main: gspca_zc3xx-2.14.0 probing 046d:08d9
[1299280.031551] input: gspca_zc3xx as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/input/input21
And lsusb detects the device :
# lsusb
Bus 002 Device 024: ID 046d:08d9 Logitech, Inc. QuickCam IM/Connect
Not sure why hwinfo thinks its a TV card needing an audio driver ?
# hwinfo --usb
....
11: USB 00.1: 11200 TV Card
[Created at usb.122]
Unique ID: uJTF.pZWswtC6BGB
Parent ID: FKGF.4Nx_qoDfSd7
SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1
SysFS BusID: 2-1.1:1.1
Hardware Class: tv card
Model: "Logitech QuickCam IM/Connect"
Hotplug: USB
Vendor: usb 0x046d "Logitech, Inc."
Device: usb 0x08d9 "QuickCam IM/Connect"
Revision: "1.00"
Driver: "snd-usb-audio"
Driver Modules: "snd_usb_audio"
Speed: 12 Mbps
Module Alias: "usb:v046Dp08D9d0100dc00dsc00dp00ic01isc01ip00in01"
Driver Info #0:
Driver Status: gspca_zc3xx is active
Driver Activation Cmd: "modprobe gspca_zc3xx"
Driver Info #1:
Driver Status: snd_usb_audio is active
Driver Activation Cmd: "modprobe snd_usb_audio"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #9 (Hub)
Pleases and thankyous for any tips or clues to get this working.
Or maybe its just too old and should be moved from spares box to physical trash bin.
TIA's
I'm not a complete idiot. There's still a few pieces missing.

bonedome
Posts: 166
Joined: 2017/04/22 08:11:04

Re: Webcam not working

Post by bonedome » 2020/03/30 19:29:06

Hello
a quick test, try opening /dev/video0 with cheese, vlc, mplayer or mpv
For mpv (and probably mplayer) you can run from cli but vlc needs to open media > open capture device, I have a built in webcam so not sure if a usb one is still in /dev/video0
Also my webcam uses "video for linux" v4l2, I have libv4l and xorg-x11-drv-v4l installed and the cli output when played/quit with mpv says "[ffmpeg/demuxer] video4linux2,v4l2: Some buffers are still owned by the caller on close." which would suggest ffmpeg is also required.
Don't bother with totem/videos, I just can't get it to work.
Edit: ok I just found an old playstation 2 usb webcam and that is /dev/video1 and only seems to work with vlc.

tunk
Posts: 726
Joined: 2017/02/22 15:08:17

Re: Webcam not working

Post by tunk » 2020/03/30 20:19:22

You may find some info if you do a web search for this:
046d 08d9 linux

Post Reply

Return to “CentOS 8 - Hardware Support”