Brocade 1020 won't work
Brocade 1020 won't work
Hi!
My Brocade 1020 NIC won't work on CentOS 8.
nmcli will not even list it.
It worked perfectly fine in 7.6, never tried 7.7.
What can I do?
My Brocade 1020 NIC won't work on CentOS 8.
nmcli will not even list it.
It worked perfectly fine in 7.6, never tried 7.7.
What can I do?
Re: Brocade 1020 won't work
Yeah, I had that idea, too.
Problem is: "lspci" isn't available anymore in 8.
Problem is: "lspci" isn't available anymore in 8.
Re: Brocade 1020 won't work
Thanks, I didn't know that!
lspci indeed lists the Adapter (it's 2, there's 2 on the PCI-E-Card):
lspci indeed lists the Adapter (it's 2, there's 2 on the PCI-E-Card):
Code: Select all
04:00.0 Fibre Channel: Cavium QLogic 1010/1020/1007/1741 10Gbps CNA (rev 01)
04:00.1 Fibre Channel: Cavium QLogic 1010/1020/1007/1741 10Gbps CNA (rev 01)
04:00.2 Ethernet controller: Cavium QLogic 1010/1020/1007/1741 10Gbps CNA (rev 01)
04:00.3 Ethernet controller: Cavium QLogic 1010/1020/1007/1741 10Gbps CNA (rev 01)
Re: Brocade 1020 won't work
Please type the command as presented. Once again,
lspci -nn | grep -i net
lspci -nn | grep -i net
CentOS Forum FAQ
Re: Brocade 1020 won't work
*oups* sorry!
Here it is:
Here it is:
Code: Select all
00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection (2) I218-V [8086:15a1]
04:00.2 Ethernet controller [0200]: Cavium QLogic 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01)
04:00.3 Ethernet controller [0200]: Cavium QLogic 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01)
Re: Brocade 1020 won't work
I see that device ID pairing [1657:0014] is in CentOS 7 but not in CentOS 8. You may want to file a request to build the driver(s) for your device at ELRepo's bug tracker.
CentOS Forum FAQ