Hi, all
Normally, vanilla CentOS 8.2 aarch64 can not be installed to raspberry pi 4b.
@Pablo provides method to install a modified CentOS 8.2 kernel to raspberry pi 4b:
https://people.centos.org/pgreco/CentOS ... Minimal-4/
And he also suggests me use RPI4_UEFI in https://rpi4-uefi.dev/. It is a SBBR-compliant (UEFI+ACPI) AArch64 firmware for the Raspberry Pi 4.
The following is my operations to install a vanilla CentOS 8.2 aarch64 to raspberry pi 4b.
1.Download uefi firmware
https://github.com/pftf/RPi4/releases/d ... _v1.18.zip
2.Create an SD card in `MBR` mode with a single partition of type `0x0c` (`FAT32 LBA`) or `0x0e` (`FAT16 LBA`). Then format this partition to `FAT`.
3.Extract all the files from the archive onto the partition you created above.
4.Insert the SD card.
------------------------------------------------------------------------
5.Prepare two usb drives.
6.Burn the vanilla CentOS 8.2 aarch64 image to a USB drive1.
7.Plug both USB drives and power up your Raspberry Pi.
------------------------------------------------------------------------
8.Now you will see the install procedure as normal. Please select the USB drive2 as the destiny drive.
The easies way to install vanilla CentOS 8.2 aarch64 on raspberry pi 4b
-
- Posts: 4
- Joined: 2014/10/15 13:03:11
Re: The easies way to install vanilla CentOS 8.2 aarch64 on raspberry pi 4b
Hi there,
I've done follow steps, but with up2date CentOS Stream 8 ISO and up2date RPi4_UEFI_Firmware.
Everything works fine except Network wasn't available during installation and afterwards after installation.
No Network card found.
How to resolve this issue?
Thanks
Andreas
I've done follow steps, but with up2date CentOS Stream 8 ISO and up2date RPi4_UEFI_Firmware.
Everything works fine except Network wasn't available during installation and afterwards after installation.
No Network card found.
How to resolve this issue?
Thanks
Andreas