Only Stream 9 innstaller not work
Only Stream 9 innstaller not work
I try to install Stream 9 from usb. But all stops with the messages 1 Shell Failed to start Reload Configuration 2 Root Failed to start Setup Virtual console 3 Started Emergency Shell
But i not see Emergency Shell
What i have to do ?
I try different way. Unplag some drives, disable some hw in bios. But all of it not help me
But i not see Emergency Shell
What i have to do ?
I try different way. Unplag some drives, disable some hw in bios. But all of it not help me
Re: Only Stream 9 innstaller not work
How did you copy the iso to the USB stick? See my Sig below for a link to the wiki page that has some advice about which tools to avoid.
Also, did you check that your downloaded file is not corrupted? There are sha256sums on all the mirrors showing what they should be.
Also, did you check that your downloaded file is not corrupted? There are sha256sums on all the mirrors showing what they should be.
CentOS 8 died a premature death at the end of 2021 - migrate to Rocky/Alma/OEL/Springdale ASAP.
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are dead, do not use them.
Use the FAQ Luke
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are dead, do not use them.
Use the FAQ Luke
Re: Only Stream 9 innstaller not work
I make flash with dd like in your link
Yes I compare sha256 and no mismatch.
Also when i try to setup Stream 8 i have no problem with it. Only Stream 9 always with this messages about Failed to start Reload Configuration and so on
Re: Only Stream 9 innstaller not work
Which CPU do you have?
Re: Only Stream 9 innstaller not work
Core 2 Quad Q8200 Dell workstation
Re: Only Stream 9 innstaller not work
And how much RAM?
CentOS 8 died a premature death at the end of 2021 - migrate to Rocky/Alma/OEL/Springdale ASAP.
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are dead, do not use them.
Use the FAQ Luke
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are dead, do not use them.
Use the FAQ Luke
Re: Only Stream 9 innstaller not work
That does it. The CPU does not support "x86_64-v2" microarchitecture and EL9 does require it.
https://developers.redhat.com/blog/2021 ... ure_levels
Several binaries in RHEL 9 (and CentOS Stream 9 due to their relationship) are compiled so that they use those CPU instructions. If CPU does not have them, then the binaries cannot run.
What has "x86_64-v2"? https://unix.stackexchange.com/question ... -x86-64-v2
That is, CPU should have flags: cx16, lahf, popcnt, sse4_1, sse4_2, and ssse3.
Your Q8200's "Penryn microarchitecture" had SSE 4.1, but it was the next, "Nehalem", that got SSE 4.2.