Here is my routing table.
[Neptune@orcacomputers ~]$ ip r
Code: Select all
default via 24.109.184.149 dev eno1 proto static metric 100
default via 24.109.185.149 dev enp9s0 proto static metric 101
24.109.184.149 dev eno1 proto static scope link metric 100
24.109.184.150 dev eno1 proto kernel scope link src 24.109.184.150 metric 100
24.109.185.149 dev enp9s0 proto static scope link metric 101
24.109.185.150 dev enp9s0 proto kernel scope link src 24.109.185.150 metric 101
192.168.101.0/24 dev virbr1 proto kernel scope link src 192.168.101.1
192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1
192.168.200.0/24 dev virbr2 proto kernel scope link src 192.168.200.1
[Neptune@orcacomputers ~]$ ifconfig
Code: Select all
eno1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 24.109.184.150 netmask 255.255.255.255 broadcast 24.109.184.150
inet6 2604:3d08:1:1b:802c:fece:22c1:a05 prefixlen 128 scopeid 0x0<global>
inet6 fe80::9d57:fe6f:7ae6:f382 prefixlen 64 scopeid 0x20<link>
ether ac:9e:17:b4:2e:cb txqueuelen 1000 (Ethernet)
RX packets 181691159 bytes 36017389595 (33.5 GiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 22592445 bytes 4213889372 (3.9 GiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 20 memory 0xfb100000-fb120000
enp9s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 24.109.185.150 netmask 255.255.255.255 broadcast 24.109.185.150
inet6 fe80::ae9e:17ff:feb4:3123 prefixlen 64 scopeid 0x20<link>
ether ac:9e:17:b4:31:23 txqueuelen 1000 (Ethernet)
RX packets 153113546 bytes 9213857669 (8.5 GiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 27500 bytes 5645637 (5.3 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device memory 0xfb600000-fb61ffff
Code: Select all
[root@orcacomputers control]# tail -F /var/log/software/current | tai64nlocal
2022-10-18 16:01:52.127311500 MacDevice: eth0
[6]+ Stopped tail -F /var/log/software/current | tai64nlocal
[root@pd2nsc1 control]# ifconfig eth0
eth0: error fetching interface information: Device not found
Here are my firewall settings
[Neptune@orcacomputers ~]$ firewall-cmd --list-all
Code: Select all
public (active)
target: default
icmp-block-inversion: no
interfaces: eno1 enp9s0
sources:
services: cockpit dhcpv6-client http https imap imaps ipp ipp-client mdns sftp smtp ssh telnet vnc-server
ports: 7689/tcp 25/tcp 80/tcp 443/tcp 143/tcp 993/tcp 587/tcp 6666/tcp 5900/tcp 5901/tcp 6600/tcp 5902/tcp 5802/tcp 5903/tcp 3389/tcp 5904/tcp 588/tcp 5912/tcp 5927/tcp 9970/tcp 53378/tcp 55698/tcp 20/tcp 21/tcp
protocols:
masquerade: yes
forward-ports: port=9970:proto=tcp:toport=22:toaddr=192.168.101.10
source-ports:
icmp-blocks:
rich rules: