I have the bridge successfully running and have created a VM (using Centos 7) that I can access via VNC. I have a working failover IP that I am trying to setup on the VM. To test the failover IP, I have installed it on the dedicated system and verified that I can ping it from the outside successfully. The IP has since been removed from the dedicated system. I have been unsuccessful in getting IP setup on the VM with the ability to ping the IP from the outside or ping anything from the inside of the VM. Obviously the main IP is completely different that the Failover IP. Here is the config for the IP from the VM:
Code: Select all
cat /etc/sysconfig/network-scripts/ifcfg-eth0
TYPE="Ethernet"
PROXY_METHOD="none"
BROWSER_ONLY="no"
BOOTPROTO="none"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_FAILURE_FATAL="no"
IPV6_ADDR_GEN_MODE="stable-privacy"
NAME="eth0"
UUID="xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"
DEVICE"eth0"=
ONBOOT="yes"
IPADDR="xxx.xxx.xx.161" # IP has been changed here in the public forum
PREFIX="30"
GATEWAY="ZZZ.ZZZ.ZZZ.254" # Told by Datacenter this is the main IP of the dedicated server with the last ocelet being 254
IPV6_PRIVACY="no"