Page 1 of 1

Upgrade NIC drivers + firmware

Posted: 2020/04/19 22:02:09
by Bashed
I need to upgrade NIC drives and firmware for my Dell R610.

First Server

Code: Select all

[root@vps ~]#  ethtool -i em1
driver: bnx2
version: 2.2.6
firmware-version: 7.12.19 bc 7.10.0 NCSI 2.0.13
expansion-rom-version: 
bus-info: 0000:01:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: no

[root@vps ~]# lspci | egrep -i --color 'network|ethernet'
01:00.0 Ethernet controller: Broadcom Inc. and subsidiaries NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
01:00.1 Ethernet controller: Broadcom Inc. and subsidiaries NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
02:00.0 Ethernet controller: Broadcom Inc. and subsidiaries NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
02:00.1 Ethernet controller: Broadcom Inc. and subsidiaries NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
Second Server

Code: Select all

[root@kvm3 speedtest-cli-master]# ethtool -i em1
driver: tg3
version: 3.137
firmware-version: FFV21.40.21 bc 5720-v1.39
expansion-rom-version: 
bus-info: 0000:01:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: no

[root@kvm3 speedtest-cli-master]# lspci | egrep -i --color 'network|ethernet'
01:00.0 Ethernet controller: Broadcom Inc. and subsidiaries NetXtreme BCM5720 2-port Gigabit Ethernet PCIe
01:00.1 Ethernet controller: Broadcom Inc. and subsidiaries NetXtreme BCM5720 2-port Gigabit Ethernet PCIe
02:00.0 Ethernet controller: Broadcom Inc. and subsidiaries NetXtreme BCM5720 2-port Gigabit Ethernet PCIe
02:00.1 Ethernet controller: Broadcom Inc. and subsidiaries NetXtreme BCM5720 2-port Gigabit Ethernet PCIe
Not sure how to do it as I tried the latest available driver based off Dell service tag, from this link:

https://www.dell.com/support/home/us/en ... 5DcWJaMFVW...

QLogic FastLinQ Network Adapter Device Firmware.
Version: 08.07.26 ,A00-00

wget..
chmod +x file name
./filename

Code: Select all

[root@vps ~]# ./Network_Firmware_82J79_LN_08.07.26_A00-00.BIN
An Inventory Collector is running. Wait until it is completed before proceeding with update.
Running Centos 7 64bit

Re: Upgrade NIC drivers + firmware

Posted: 2020/04/20 09:35:37
by TrevorH
And did you wait for the inventory collector to finish?