General support questions
-
y1ka
- Posts: 2
- Joined: 2021/08/04 11:20:24
Post
by y1ka » 2021/08/04 14:34:27
Hi!
working kernel:
Code: Select all
[ 0.000000] Linux version 5.4.115-200.el7.x86_64 (mockbuild@kbuilder.bsys.centos.org) (gcc version 8.3.1 20190311 (Red Hat 8.3.1-3) (GCC)) #1 SMP Tue May 4 19:47:39 UTC 2021
[ 0.000000] DMI: HP ProLiant BL460c Gen9, BIOS I36 10/16/2020
[ 2.472686] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.713.36-0 (2014/02/10)
[ 2.480521] bnx2x 0000:06:00.0: msix capability found
[ 2.480757] bnx2x 0000:06:00.0: part number 0-0-0-0
[ 2.654360] bnx2x 0000:06:00.0: 63.008 Gb/s available PCIe bandwidth (8 GT/s x8 link)
[ 3.413014] bnx2x 0000:06:00.1: msix capability found
[ 3.413149] bnx2x 0000:06:00.1: part number 0-0-0-0
[ 3.580946] bnx2x 0000:06:00.1: 63.008 Gb/s available PCIe bandwidth (8 GT/s x8 link)
[ 3.583293] bnx2x 0000:06:00.1 eno50: renamed from eth1
[ 3.635311] bnx2x 0000:06:00.0 eno49: renamed from eth0
not working kernel:
Code: Select all
[ 0.000000] Linux version 5.4.134-200.el7.x86_64 (mockbuild@kbuilder.bsys.centos.org) (gcc version 8.3.1 20190311 (Red Hat 8.3.1-3) (GCC)) #1 SMP Fri Jul 30 17:26:51 UTC 2021
[ 0.000000] DMI: HP ProLiant BL460c Gen9, BIOS I36 10/16/2020
[ 12.158021] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.713.36-0 (2014/02/10)
[ 12.158360] bnx2x 0000:06:00.0: msix capability found
[ 12.158595] bnx2x 0000:06:00.0: part number 0-0-0-0
[ 12.343834] bnx2x: probe of 0000:06:00.0 failed with error -22
[ 13.118634] bnx2x 0000:06:00.1: msix capability found
[ 13.118771] bnx2x 0000:06:00.1: part number 0-0-0-0
[ 13.286812] bnx2x: probe of 0000:06:00.1 failed with error -22
How can this problem be solved?
Regards
-
TrevorH
- Site Admin
- Posts: 33215
- Joined: 2009/09/24 10:40:56
- Location: Brighton, UK
Post
by TrevorH » 2021/08/04 16:57:09
I'd suggest checking that you have the latest firmware for the cards installed as a first step. There may be lines in the log on the successful version that tell you which file it's using for firmware and where from.
-
y1ka
- Posts: 2
- Joined: 2021/08/04 11:20:24
Post
by y1ka » 2021/08/05 07:04:01
yes, the latest firmware is installed.
Code: Select all
================================================================
Copyright (c) 2021 Hewlett Packard Enterprise Development LP
HPE Blade QLogic NX2 Online Firmware Upgrade Utility for Linux
================================================================
Installation started: [Tue Aug 3 15:19:01 2021]
Installing: CP045081.scexe
Version: 1.2.3
OS: CentOS Linux 7 (Core)
Kernel Release: 5.4.115-200.el7.x86_64
Driver Info: bnx2x-1.713.36-0
Adapters: "HP FlexFabric 10Gb 2-port 536FLB Adapter";
Command: ./.setup
[INFO] Found HP FlexFabric 10Gb 2-port 536FLB Adapter MAC: 5820B1E42460
[INFO] Do you want to update the following firmware on eno49 :
[WARNING] .[1;30m*** WARNING ***.[0m - Installed firmware is the same version as selected firmware.
[INFO] MBI 7.18.77 to 7.18.77 - y/n/q (Default option is 'n' when you simply press enter): n
[INFO] Installation (MBI) was not attempted on eno49 interface (MAC:5820B1E42460) because installed firmware version is same as available firmware.
[INFO] Installation was skipped on all available NIC(s).
I can't find lines in the log that show which file it uses for the firmware and where.