Printer (Samsung) does not work in centos7 but OK in 6.5

General support questions
Post Reply
phl
Posts: 8
Joined: 2014/07/16 07:03:30

Printer (Samsung) does not work in centos7 but OK in 6.5

Post by phl » 2014/07/16 07:17:22

Hello,

in centos 6.5, I have got a driver from samsung (CLX-3185N),I install it and 2 minutes later, the network printer and network scanner are working without any problem.

I do the same thing in centos7, I add to localhost:631 = CUPS the printer, but printer is KO and the scanner is not detected by Xsane. I try to stop SElinux and firewall, but the problem is always here.

Do you have any pointer?
Is it a configuration problem ? A right problem? Or the samsung drivers is to old to work with centos7 ?

Thanks,
PHL.

john_wilwert
Posts: 12
Joined: 2014/08/22 23:08:15

Re: Printer (Samsung) does not work in centos7 but OK in 6.5

Post by john_wilwert » 2014/08/23 00:11:41

Hi - I have a similar issue with my Brother MFC-J470DW (all in one, wireless printer/scanner). Works GREAT in CentOS 6.5 - dead using CentOS 7.0. Same install procedure was used for both. HELP!!
Many THANKS! in advance,
John Wilwert

phl
Posts: 8
Joined: 2014/07/16 07:03:30

Re: Printer (Samsung) does not work in centos7 but OK in 6.5

Post by phl » 2014/08/23 18:49:11

Hello,

No more idea for the printer problem ?
After uninstall and reinstall the driver and the printer, always the same problem.

If I check in /va/log/cups/error_log:

Code: Select all

E [23/Aug/2014:20:02:27 +0200] Unknown directive JobPrivateAccess on line 83 of /etc/cups/cupsd.conf.
E [23/Aug/2014:20:02:27 +0200] Unknown directive JobPrivateValues on line 84 of /etc/cups/cupsd.conf.
E [23/Aug/2014:20:02:27 +0200] Unknown directive SubscriptionPrivateAccess on line 85 of /etc/cups/cupsd.conf.
E [23/Aug/2014:20:02:27 +0200] Unknown directive SubscriptionPrivateValues on line 86 of /etc/cups/cupsd.conf.
W [23/Aug/2014:20:02:32 +0200] AddProfile failed: org.freedesktop.DBus.Error.UnknownMethod:L'interface « org.freedesktop.ColorManager » n'existe pas pour l'objet à l'emplacement /org/freedesktop/ColorManager/devices/cups_Samsung_CLX_3180
W [23/Aug/2014:20:02:32 +0200] AddProfile failed: org.freedesktop.DBus.Error.UnknownMethod:L'interface « org.freedesktop.ColorManager » n'existe pas pour l'objet à l'emplacement /org/freedesktop/ColorManager/devices/cups_Samsung_CLX_3180

E [23/Aug/2014:20:16:42 +0200] [cups-driverd] Bad driver information file "/usr/share/cups/model/uld-samsung/cms/C410sc.cts", ....
E [23/Aug/2014:20:16:42 +0200] [cups-driverd] Bad driver information file "/usr/share/cups/model/uld-samsung/cms/CLX-3180sc.cts"!

E [23/Aug/2014:20:16:42 +0200] [cups-driverd] Skipping "/usr/share/ppd/uld-samsung": loop detected!
E [23/Aug/2014:20:17:04 +0200] [Job 14] Unable to add document to print job.


What is the conclusion ? the driver from samsung is not compatible with cups 1.6 ? Must I downgrade the cup 1.6 to cups 1.4 ?

(PS with the new installation the scanner of the Samsung printer is now working with Xsane).

Thanks
PHL

chemal
Posts: 694
Joined: 2013/12/08 19:44:49

Re: Printer (Samsung) does not work in centos7 but OK in 6.5

Post by chemal » 2014/08/23 23:21:56

You are using a non C7 driver for your printer? Something put together by Samsung, perhaps?

Post Reply

Return to “CentOS 7 - General Support”