Install CentOS 4.x with boot media over network on x86_64

Support for the other architectures (X86_64, s390(x) and PowerPC)
Post Reply
Posts: 1
Joined: 2008/09/17 01:32:09

Install CentOS 4.x with boot media over network on x86_64

Post by lorriew » 2008/09/17 02:05:16

I'm having a hard time working this one out:

* x86_64 architecture
* boot from optical media
* an httpd server with full distro
* a kickstart file that's known to work from optical media (I'll copy it below)
* no dhcp/tftp available (at the moment)

I'm having trouble getting the install to work right--and I think the root of the problem is a lack of a network install boot image for x86_64 media. When I find CentOS/RHEL 4 boot media, it's 386/586--and that won't do, as it will then only load a 32-bit os (I tried this already).

Has anyone licked this for x86_64/CentOS 4.x?

In the hopes that my problem is something else, I'll babble on a little further about what I've attempted so far:

With CentOS 5, there's a network boot disk available for x86_64, and I've used it happily--but we're not ready to move to CentOS 5 yet, so any new builds for the forseeable future have to be CentOS 4.

Here are things that work:
* I can boot from optical media and tell it to install the OS from that media
* I can boot from optical media and give it ks=http://blah/blah/ks.cfg -- this eventually works once I can configure the network manually
* the kickstart file is copied over the network, read, and is very nearly used properly

What doesn't work:
* Early on in the process, the install program attempts to unmount...something. A loopback device, so it's a disk image from someplace. It's trying to unmount an image from the CD when it shouldn't be thinking "cd!" at all once the kickstart file is read.

The relevant parts of my kickstart file are below--thanks in advance for any help!

-- Lorrie

# Kickstart file

url --url http://correct/url/goes/here
lang en_US.UTF-8
langsupport --default=en_US.UTF-8 en_US.UTF-8
keyboard us
network --device eth0 --bootproto static --ip aaa.bbb.ccc.ddd --netmask --gateway aaa.bbb.ccc.1 --nameserver aaa.bbb.eee.fff --hostname xxxx
rootpw --iscrypted elided-for-my-convenience
firewall --disabled
selinux --disabled
authconfig --enableshadow --enablemd5
timezone --utc America/New_York

bootloader --location=mbr --append="rhgb quiet"

Posts: 10642
Joined: 2005/08/05 15:19:54
Location: Northern Illinois, USA

Install CentOS 4.x with boot media over network on x86_64

Post by gerald_clark » 2008/09/17 13:59:09

Use the x86_64 DVD image.

Post Reply

Return to “CentOS 4 - X86_64,s390(x) and PowerPC Support”