kexec / kdump kernel panic

Support for the other architectures (X86_64, s390(x) and PowerPC)
Post Reply
midair77
Posts: 19
Joined: 2006/10/03 19:04:39

kexec / kdump kernel panic

Post by midair77 » 2006/10/03 19:30:07

Hi, I have a dual Xeon 3.2 GHz with Cent OS 4.3 and this box is in a cluster. It keeps bailling out with kernel panic type of error and I can not determine for sure what type of kernel or hardware problem. I have tried to play with kexec and kdump with the hope to set up and capture the kernel dump to debug.

I have followed the instruction in linux-2.16.18 Documentation/kdump/kdump.txt closely but still have not been able to get it to work for loading the caputured kernel for panic kernel situation.

I have the system kernel with Linux 2.16.18 booted up and set with crashkernel=128M@16M. I compiled this system kernel with KEXEC, SYSFS, DEBUG_INFO and CRASH_DUMP enabled. When this box is up with this system kernel and can see that the total memory is 128 MB less than the physical memory.

For the crash/captured kernel, I had SMP disable and KEXEC, CRASH_DUMP, and VMCORE enabled. PHYSICAL_START=0x1000000.

I first tested with the following command and saw that the crash/captured kernel booted up the box without going through the BIOS initialization.

/usr/sbin/kexec -l /boot/vmlinux --initrd=/boot/initrd-2.6.18-kdump.img --args-linux --append="root=/dev/sda3 init 1"

However, when I tried to load the crash/captured kernel for kernel panic situation, I just got failed to load kernel /boot/vmlinux error message. I used the following command to load :

/usr/sbin/kexec -p /boot/vmlinux --initrd=/boot/initrd-2.6.18-kdump.img --args-linux --append="root=/dev/sda3 irqpoll init 1"

I did make sure that vmlinux is not a bzImage file by using this command

readelf -h /boot/vmlinux

and I was able to see the output of this command. If I used this one with bzImage file, I won't see anything. So I am pretty sure the kernel file vmlinux is ok.

I did strace the second command but did not gain any special knowledge here and no error message could be found in any log files.

I used kexec-tools-1.101 and kexec-tools-1.101-kdump10.patch.

Output of lspci command

00:00.0 Host bridge: Intel Corporation E7320 Memory Controller Hub (rev 0c)
00:02.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A (rev 0c)
00:03.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A1 (rev 0c)
00:1c.0 PCI bridge: Intel Corporation 6300ESB 64-bit PCI-X Bridge (rev 02)
00:1d.0 USB Controller: Intel Corporation 6300ESB USB Universal Host Controller (rev 02)
00:1d.1 USB Controller: Intel Corporation 6300ESB USB Universal Host Controller (rev 02)
00:1d.4 System peripheral: Intel Corporation 6300ESB Watchdog Timer (rev 02)
00:1d.5 PIC: Intel Corporation 6300ESB I/O Advanced Programmable Interrupt Controller (rev 02)
00:1d.7 USB Controller: Intel Corporation 6300ESB USB2 Enhanced Host Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 0a)
00:1f.0 ISA bridge: Intel Corporation 6300ESB LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 6300ESB SATA Storage Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 6300ESB SMBus Controller (rev 02)
01:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A (rev 09)
01:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B (rev 09)
05:01.0 Ethernet controller: Intel Corporation 82541GI/PI Gigabit Ethernet Controller (rev 05)
05:02.0 Ethernet controller: Intel Corporation 82541GI/PI Gigabit Ethernet Controller (rev 05)
06:02.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)

cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Xeon(TM) CPU 3.20GHz
stepping : 3
cpu MHz : 3200.188
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 1
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall lm constant_tsc pni monitor ds_cpl cid cx16 xtpr
bogomips : 6408.11
clflush size : 64
cache_alignment : 128
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Xeon(TM) CPU 3.20GHz
stepping : 3
cpu MHz : 3200.188
cache size : 2048 KB
physical id : 3
siblings : 2
core id : 0
cpu cores : 1
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall lm constant_tsc pni monitor ds_cpl cid cx16 xtpr
bogomips : 6400.78
clflush size : 64
cache_alignment : 128
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 2
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Xeon(TM) CPU 3.20GHz
stepping : 3
cpu MHz : 3200.188
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 1
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall lm constant_tsc pni monitor ds_cpl cid cx16 xtpr
bogomips : 6400.68
clflush size : 64
cache_alignment : 128
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 3
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Xeon(TM) CPU 3.20GHz
stepping : 3
cpu MHz : 3200.188
cache size : 2048 KB
physical id : 3
siblings : 2
core id : 0
cpu cores : 1
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall lm constant_tsc pni monitor ds_cpl cid cx16 xtpr
bogomips : 6400.80
clflush size : 64
cache_alignment : 128
address sizes : 36 bits physical, 48 bits virtual
power management:

cat /proc/meminfo
MemTotal: 3916588 kB
MemFree: 3695580 kB
Buffers: 30368 kB
Cached: 137364 kB
SwapCached: 0 kB
Active: 40644 kB
Inactive: 134164 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 3916588 kB
LowFree: 3695580 kB
SwapTotal: 5742364 kB
SwapFree: 5742364 kB
Dirty: 8 kB
Writeback: 0 kB
AnonPages: 7232 kB
Mapped: 5088 kB
Slab: 27124 kB
PageTables: 992 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
CommitLimit: 7700656 kB
Committed_AS: 16448 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 3208 kB
VmallocChunk: 34359734915 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
Hugepagesize: 2048 kB

Output of dmesg command
Bootdata ok (command line is ro root=/dev/sda3 crashkernel=128M@16M rhgb quiet)
Linux version 2.6.18 (root@node30.mydomain.com) (gcc version 3.4.5 20051201 (Red Hat 3.4.5-2)) #2 SMP Wed Sep 27 16:23:23 PDT 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ea070 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dffe0000 (usable)
BIOS-e820: 00000000dffe0000 - 00000000dffef000 (ACPI data)
BIOS-e820: 00000000dffef000 - 00000000dfff0000 (ACPI NVS)
BIOS-e820: 00000000dfff0000 - 00000000e0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec86000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
DMI 2.3 present.
ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000f7740
ACPI: RSDT (v001 A M I OEMRSDT 0x03000529 MSFT 0x00000097) @ 0x00000000dffe0000
ACPI: FADT (v002 A M I OEMFACP 0x03000529 MSFT 0x00000097) @ 0x00000000dffe0200
ACPI: MADT (v001 A M I OEMAPIC 0x03000529 MSFT 0x00000097) @ 0x00000000dffe0390
ACPI: OEMB (v001 A M I AMI_OEM 0x03000529 MSFT 0x00000097) @ 0x00000000dffef040
ACPI: DSDT (v001 DVA4G DVA4G007 0x00000007 INTL 0x02002026) @ 0x0000000000000000
No NUMA configuration found
Faking a node at 0000000000000000-0000000120000000
Bootmem setup node 0 0000000000000000-0000000120000000
On node 0 totalpages: 1030000
DMA zone: 3920 pages, LIFO batch:0
DMA32 zone: 897056 pages, LIFO batch:31
Normal zone: 129024 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
Processor #6 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
Processor #7 15:4 APIC version 20
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0b] address[0xfec10000] gsi_base[72])
IOAPIC[1]: apic_id 11, version 32, address 0xfec10000, GSI 72-95
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
IOAPIC[2]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec80400] gsi_base[48])
IOAPIC[3]: apic_id 10, version 32, address 0xfec80400, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to physical flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
Built 1 zonelists. Total pages: 1030000
Kernel command line: ro root=/dev/sda3 crashkernel=128M@16M rhgb quiet
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 3200.188 MHz processor.
Console: colour VGA+ 80x25
| Locking API testsuite:
----------------------------------------------------------------------------
| spin |wlock |rlock |mutex | wsem | rsem |
--------------------------------------------------------------------------
A-A deadlock:failed|failed| ok |failed|failed|failed|
A-B-B-A deadlock:failed|failed| ok |failed|failed|failed|
A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed|
A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed|
A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed|
A-B-C-D-B-D-D-A deadlock:failed|failed| ok |failed|failed|failed|
A-B-C-D-B-C-D-A deadlock:failed|failed| ok |failed|failed|failed|
double unlock: ok | ok |failed|failed|failed|failed|
initialize held:failed|failed|failed|failed|failed|failed|
bad unlock order: ok | ok | ok | ok | ok | ok |
--------------------------------------------------------------------------
recursive read-lock: | ok | |failed|
recursive read-lock #2: | ok | |failed|
mixed read-write-lock: |failed| |failed|
mixed write-read-lock: |failed| |failed|
--------------------------------------------------------------------------
hard-irqs-on + irq-safe-A/12:failed|failed| ok |
soft-irqs-on + irq-safe-A/12:failed|failed| ok |
hard-irqs-on + irq-safe-A/21:failed|failed| ok |
soft-irqs-on + irq-safe-A/21:failed|failed| ok |
sirq-safe-A => hirqs-on/12:failed|failed| ok |
sirq-safe-A => hirqs-on/21:failed|failed| ok |
hard-safe-A + irqs-on/12:failed|failed| ok |
soft-safe-A + irqs-on/12:failed|failed| ok |
hard-safe-A + irqs-on/21:failed|failed| ok |
soft-safe-A + irqs-on/21:failed|failed| ok |
hard-safe-A + unsafe-B #1/123:failed|failed| ok |
soft-safe-A + unsafe-B #1/123:failed|failed| ok |
hard-safe-A + unsafe-B #1/132:failed|failed| ok |
soft-safe-A + unsafe-B #1/132:failed|failed| ok |
hard-safe-A + unsafe-B #1/213:failed|failed| ok |
soft-safe-A + unsafe-B #1/213:failed|failed| ok |
hard-safe-A + unsafe-B #1/231:failed|failed| ok |
soft-safe-A + unsafe-B #1/231:failed|failed| ok |
hard-safe-A + unsafe-B #1/312:failed|failed| ok |
soft-safe-A + unsafe-B #1/312:failed|failed| ok |
hard-safe-A + unsafe-B #1/321:failed|failed| ok |
soft-safe-A + unsafe-B #1/321:failed|failed| ok |
hard-safe-A + unsafe-B #2/123:failed|failed| ok |
soft-safe-A + unsafe-B #2/123:failed|failed| ok |
hard-safe-A + unsafe-B #2/132:failed|failed| ok |
soft-safe-A + unsafe-B #2/132:failed|failed| ok |
hard-safe-A + unsafe-B #2/213:failed|failed| ok |
soft-safe-A + unsafe-B #2/213:failed|failed| ok |
hard-safe-A + unsafe-B #2/231:failed|failed| ok |
soft-safe-A + unsafe-B #2/231:failed|failed| ok |
hard-safe-A + unsafe-B #2/312:failed|failed| ok |
soft-safe-A + unsafe-B #2/312:failed|failed| ok |
hard-safe-A + unsafe-B #2/321:failed|failed| ok |
soft-safe-A + unsafe-B #2/321:failed|failed| ok |
hard-irq lock-inversion/123:failed|failed| ok |
soft-irq lock-inversion/123:failed|failed| ok |
hard-irq lock-inversion/132:failed|failed| ok |
soft-irq lock-inversion/132:failed|failed| ok |
hard-irq lock-inversion/213:failed|failed| ok |
soft-irq lock-inversion/213:failed|failed| ok |
hard-irq lock-inversion/231:failed|failed| ok |
soft-irq lock-inversion/231:failed|failed| ok |
hard-irq lock-inversion/312:failed|failed| ok |
soft-irq lock-inversion/312:failed|failed| ok |
hard-irq lock-inversion/321:failed|failed| ok |
soft-irq lock-inversion/321:failed|failed| ok |
hard-irq read-recursion/123: ok |
soft-irq read-recursion/123: ok |
hard-irq read-recursion/132: ok |
soft-irq read-recursion/132: ok |
hard-irq read-recursion/213: ok |
soft-irq read-recursion/213: ok |
hard-irq read-recursion/231: ok |
soft-irq read-recursion/231: ok |
hard-irq read-recursion/312: ok |
soft-irq read-recursion/312: ok |
hard-irq read-recursion/321: ok |
soft-irq read-recursion/321: ok |
--------------------------------------------------------
143 out of 218 testcases failed, as expected. |
----------------------------------------------------
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x9669000 - 0xd669000
Memory: 3915420k/4718592k available (2369k kernel code, 278356k reserved, 1248k data, 204k init)
Calibrating delay using timer specific routine.. 6408.11 BogoMIPS (lpj=12816229)Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
Using local APIC timer interrupts.
result 12500637
Detected 12.500 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/4 APIC 0x6
Initializing CPU#1
Calibrating delay using timer specific routine.. 6400.78 BogoMIPS (lpj=12801576)CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
CPU1: Thermal monitoring enabled (TM1)
Intel(R) Xeon(TM) CPU 3.20GHz stepping 03
SMP alternatives: switching to SMP code
Booting processor 2/4 APIC 0x1
Initializing CPU#2
Calibrating delay using timer specific routine.. 6400.68 BogoMIPS (lpj=12801365)CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU2: Thermal monitoring enabled (TM1)
Intel(R) Xeon(TM) CPU 3.20GHz stepping 03
SMP alternatives: switching to SMP code
Booting processor 3/4 APIC 0x7
Initializing CPU#3
Calibrating delay using timer specific routine.. 6400.80 BogoMIPS (lpj=12801616)CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
CPU3: Thermal monitoring enabled (TM1)
Intel(R) Xeon(TM) CPU 3.20GHz stepping 03
Brought up 4 CPUs
testing NMI watchdog ... OK.
migration_cost=16,1328
checking if image is initramfs... it is
Freeing initrd memory: 963k freed
PM: Adding info for No Bus:platform
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
PM: Adding info for acpi:acpi
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PM: Adding info for No Bus:pci0000:00
PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
Boot video device is 0000:06:02.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PM: Adding info for pci:0000:00:00.0
PM: Adding info for pci:0000:00:02.0
PM: Adding info for pci:0000:00:03.0
PM: Adding info for pci:0000:00:1c.0
PM: Adding info for pci:0000:00:1d.0
PM: Adding info for pci:0000:00:1d.1
PM: Adding info for pci:0000:00:1d.4
PM: Adding info for pci:0000:00:1d.5
PM: Adding info for pci:0000:00:1d.7
PM: Adding info for pci:0000:00:1e.0
PM: Adding info for pci:0000:00:1f.0
PM: Adding info for pci:0000:00:1f.2
PM: Adding info for pci:0000:00:1f.3
PM: Adding info for pci:0000:01:00.0
PM: Adding info for pci:0000:01:00.2
PM: Adding info for pci:0000:05:01.0
PM: Adding info for pci:0000:05:02.0
PM: Adding info for pci:0000:06:02.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EPA0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EPA0.PXHA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EPA0.PXHB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EPA1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
PM: Adding info for No Bus:pnp0
PM: Adding info for pnp:00:00
PM: Adding info for pnp:00:01
PM: Adding info for pnp:00:02
PM: Adding info for pnp:00:03
PM: Adding info for pnp:00:04
PM: Adding info for pnp:00:05
PM: Adding info for pnp:00:06
PM: Adding info for pnp:00:07
PM: Adding info for pnp:00:08
PM: Adding info for pnp:00:09
PM: Adding info for pnp:00:0a
PM: Adding info for pnp:00:0b
PM: Adding info for pnp:00:0c
PM: Adding info for pnp:00:0d
PM: Adding info for pnp:00:0e
PM: Adding info for pnp:00:0f
pnp: PnP ACPI: found 16 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI-GART: No AMD northbridge found.
pnp: 00:0a: ioport range 0x295-0x296 has been reserved
pnp: 00:0a: ioport range 0xb78-0xb7f has been reserved
pnp: 00:0d: ioport range 0x680-0x6ff has been reserved
PCI: Bridge: 0000:01:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:01:00.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:02.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
IO window: c000-cfff
MEM window: fc900000-fc9fffff
PREFETCH window: fc700000-fc7fffff
PCI: Bridge: 0000:00:1e.0
IO window: d000-dfff
MEM window: fca00000-feafffff
PREFETCH window: e2000000-e20fffff
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:01:00.0 to 64
PCI: Setting latency timer of device 0000:01:00.2 to 64
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
PM: Adding info for platform:pcspkr
audit: initializing netlink socket (disabled)
audit(1159812308.240:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:02.0 to 64
Allocate Port Service[0000:00:02.0:pcie00]
PM: Adding info for pci_express:0000:00:02.0:pcie00
PCI: Setting latency timer of device 0000:00:03.0 to 64
Allocate Port Service[0000:00:03.0:pcie00]
PM: Adding info for pci_express:0000:00:03.0:pcie00
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
PM: Adding info for platform:vesafb.0
ACPI: Processor [CPU1] (supports 8 throttling states)
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
PM: Adding info for platform:serial8250
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
ide1: I/O resource 0x170-0x177 not free.
ide1: ports already in use, skipping probe
ide-floppy driver 0.99.newide
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
PM: Adding info for platform:i8042
serio: i8042 AUX port at 0x60,0x64 irq 12
PM: Adding info for serio:serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
PM: Adding info for serio:serio1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 204k freed
Write protecting the kernel read-only data: 455k
SCSI subsystem initialized
input: AT Translated Set 2 keyboard as /class/input/input0
libata version 2.00 loaded.
ata_piix 0000:00:1f.2: version 2.00
ata_piix 0000:00:1f.2: MAP [ IDE IDE P0 P1 ]
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xFC00 irq 14
scsi0 : ata_piix
PM: Adding info for No Bus:host0
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFC08 irq 15
scsi1 : ata_piix
PM: Adding info for No Bus:host1
ata2.00: ATA-7, max UDMA/133, 156312576 sectors: LBA48
ata2.00: ata2: dev 0 multi count 16
ata2.00: configured for UDMA/133
PM: Adding info for No Bus:target1:0:0
Vendor: ATA Model: WDC WD800JD-08LS Rev: 07.0
Type: Direct-Access ANSI SCSI revision: 05
PM: Adding info for scsi:1:0:0:0
SCSI device sda: 156312576 512-byte hdwr sectors (80032 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 156312576 512-byte hdwr sectors (80032 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4
sd 1:0:0:0: Attached scsi disk sda
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1159812310.148:2): selinux=0 auid=4294967295
input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
FDC 0 is a post-1991 82077
Intel(R) PRO/1000 Network Driver - version 7.1.9-k4-NAPI
Copyright (c) 1999-2006 Intel Corporation.
GSI 18 sharing vector 0xB9 and IRQ 18
ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 74 (level, low) -> IRQ 18
e1000: 0000:05:01.0: e1000_validate_option: Receive Interrupt Delay set to 0
e1000: 0000:05:01.0: e1000_check_options: Interrupt Throttling Rate (ints/sec) turned off
e1000: 0000:05:01.0: e1000_probe: (PCI:66MHz:32-bit) 00:30:48:83:12:66
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 19 sharing vector 0xC1 and IRQ 19
ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 75 (level, low) -> IRQ 19
e1000: 0000:05:02.0: e1000_probe: (PCI:66MHz:32-bit) 00:30:48:83:12:67
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 20 sharing vector 0xC9 and IRQ 20
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 20
PM: Adding info for No Bus:i2c-0
i6300ESB timer: initialized (0xffffc20000004800). heartbeat=30 sec (nowayout=0)
GSI 21 sharing vector 0xD1 and IRQ 21
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfebffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
PM: Adding info for usb:usb1
PM: Adding info for No Bus:usbdev1.1_ep00
usb usb1: configuration #1 chosen from 1 choice
PM: Adding info for usb:1-0:1.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
PM: Adding info for No Bus:usbdev1.1_ep81
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e800
PM: Adding info for usb:usb2
PM: Adding info for No Bus:usbdev2.1_ep00
usb usb2: configuration #1 chosen from 1 choice
PM: Adding info for usb:2-0:1.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PM: Adding info for No Bus:usbdev2.1_ep81
GSI 22 sharing vector 0xD9 and IRQ 22
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ec00
PM: Adding info for usb:usb3
PM: Adding info for No Bus:usbdev3.1_ep00
usb usb3: configuration #1 chosen from 1 choice
PM: Adding info for usb:3-0:1.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PM: Adding info for No Bus:usbdev3.1_ep81
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
EXT3 FS on sda3, internal journal
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 5742364k swap on /dev/sda2. Priority:-1 extents:1 across:5742364k
ip_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
eth0: no IPv6 routers present

Could some experts here give me some helps or point me to where I could get help for this problem?

Thank you very much.

Post Reply

Return to “CentOS 4 - X86_64,s390(x) and PowerPC Support”