Dell Wireless 1390 WLAN-ndiswrapper problem

Issues related to configuring your network
sc266
Posts: 15
Joined: 2007/07/22 06:58:25

Dell Wireless 1390 WLAN-ndiswrapper problem

Post by sc266 » 2007/07/22 07:14:50

I tried to make my Dell 1390 wireless working on my laptop with CentOS4.5. I followed ndis installed from wiki but when I do modprobe, it error ..unknow symobol...unknow parameter. Searched on this forum, I need to install kernel-module-ndiswrapper. I download "kernel-module-ndiswrapper-2.6.9-55.0.2.ELsmp-1.41-1.SL.i686.rpm" that match with my kernel "uname -r: 2.6.9-55.0.2.ELsmp" but when I do rpm, it error: "
warning: kernel-module-ndiswrapper-2.6.9-55.0.2.ELsmp-1.41-1.SL.i686.rpm: V3 DSA signature: NOKEY, key ID 82fd17b2
error: Failed dependencies:
ndiswrapper >= 0:1.41 is needed by kernel-module-ndiswrapper-2.6.9-55.0.2.ELsmp-1.41-1.SL.i686.

Please tell me what I should do to make Dell 1390 wireless working. Any help will be appreciated

Also, I got problem with my touch pad, the mouse do not work. Please help

Thanks and Best Regards

sc266
Posts: 15
Joined: 2007/07/22 06:58:25

Re: Dell Wireless 1390 WLAN-ndiswrapper problem

Post by sc266 » 2007/07/29 18:27:33

Hi! All

I'm alone on this forum?

Thanks :-(

Brian1
Posts: 7
Joined: 2006/05/28 22:31:45

Dell Wireless 1390 WLAN-ndiswrapper problem

Post by Brian1 » 2007/08/19 17:40:07

The kernel-module-ndiswrapper-2.6.9-55.0.2.ELsmp-1.41-1.SL.i686.rpm is just the module that is just built for the kernel. You also need the following the full ndiswrapper package that it is asking for in rpm package.

Brian

User avatar
toracat
Forum Moderator
Posts: 7453
Joined: 2006/09/03 16:37:24
Location: California, US
Contact:

Re: Dell Wireless 1390 WLAN-ndiswrapper problem

Post by toracat » 2007/08/19 18:57:35

The problem stemed from the fact you downloaded the rpm and tried to manually install it. Always use yum to install packages. It takes care of dependencies and pulls the required rpms for you.

sc266
Posts: 15
Joined: 2007/07/22 06:58:25

Re: Dell Wireless 1390 WLAN-ndiswrapper problem

Post by sc266 » 2007/09/04 07:06:32

Brian1,

Can you tell me more detail? I'm newbie in linux.If possible, can you tell me how to make dell 1390 wireless working on centos4.5 without rebuild kernel?

Thanks

User avatar
toracat
Forum Moderator
Posts: 7453
Joined: 2006/09/03 16:37:24
Location: California, US
Contact:

Re: Dell Wireless 1390 WLAN-ndiswrapper problem

Post by toracat » 2007/09/04 10:08:57

First learn how to set up the rpmforge repo. ndiswrapper is available from there. By the way what you downloaded is for Scientific Linux (marked SL). It may work on CentOS but noa a recommended method.

Read the wiki http://wiki.centos.org/Repositories and go to the 3rd party repositories section. There is a link to the RPMForge setup page. Make sure you follow the instructions.

Akemi

sc266
Posts: 15
Joined: 2007/07/22 06:58:25

Re: Dell Wireless 1390 WLAN-ndiswrapper problem

Post by sc266 » 2007/09/05 06:09:49

Hi! Akemi,

I did exactly what you told me about RPMForge and everything go with the way it should be. But I did not see kernel-module-ndiswrapper-2.6.9-55.0.2.ELsmp at DAG website. Kernel module overthere is kind of old.
This is what I did so far: I followed wiki ndiswrapper instruction to install my Dell 1390 wireless, every steps go smoothly but when I do

[root@localhost DRIVER]# modprobe ndiswrapper
FATAL: Error inserting ndiswrapper (/lib/modules/2.6.9-55.0.2.ELsmp/misc/ndiswrapper.ko): Unknown symbol in module, or unknown parameter

I'm stuck right here. Please tell me what should I do next?
Thanks and Best Regards,

User avatar
toracat
Forum Moderator
Posts: 7453
Joined: 2006/09/03 16:37:24
Location: California, US
Contact:

Re: Dell Wireless 1390 WLAN-ndiswrapper problem

Post by toracat » 2007/09/05 11:58:53

You need to install dkms-ndiswrapper from rpmforge. This will also install dkms as well as kernel-devel (if you do not already have it).

sc266
Posts: 15
Joined: 2007/07/22 06:58:25

Re: Dell Wireless 1390 WLAN-ndiswrapper problem

Post by sc266 » 2007/09/06 07:43:28

Hi!

I installed dkms-ndiswrapper package as you suggested, removed ndiswrapper and driver and reinstalled ndiswrapper. when I type ndiswrapper -l, see what I got

[root@localhost driver34152]# ndiswrapper -l
Unknown line at line 5959
Unknown line at line 5960
Unknown line at line 5961
Unknown line at line 5962
Unknown line at line 5963
Unknown line at line 5964
Unknown line at line 5965
Unknown line at line 5966
Unknown line at line 5967
Unknown line at line 5968
Unknown line at line 5969
Unknown line at line 5970
bcmwl5 : driver installed
device (14E4:4311) present
I continued as
[root@localhost driver34152]# depmod -a
[root@localhost driver34152]# modprobe ndiswrapper
FATAL: Error inserting ndiswrapper (/lib/modules/2.6.9-55.0.2.ELsmp/misc/ndiswrapper.ko): Unknown symbol in module, or unknown parameter (see dmesg)

When I type dmesg, here is output:

[root@localhost driver34152]# dmesg
Linux version 2.6.9-55.0.2.ELsmp (mockbuild@builder4.centos.org) (gcc version 3. 4.6 20060404 (Red Hat 3.4.6-8)) #1 SMP Tue Jun 26 14:30:58 EDT 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007bf00000 (usable)
BIOS-e820: 000000007bf00000 - 000000007bf17000 (ACPI data)
BIOS-e820: 000000007bf17000 - 000000007bf80000 (ACPI NVS)
BIOS-e820: 000000007bf80000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
1087MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f8960
NX (Execute Disable) protection: active
On node 0 totalpages: 507648
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 278272 pages, LIFO batch:16
DMI present.
Using APIC driver default
ACPI: RSDP (v000 HP ) @ 0x000f8930
ACPI: RSDT (v001 HPQOEM SLIC-MPC 0x06040000 LTP 0x00000000) @ 0x7bf0dd1b
ACPI: FADT (v001 HP MCP51M 0x06040000 PTL_ 0x000f4240) @ 0x7bf16b9a
ACPI: SSDT (v001 HP POWERNOW 0x06040000 LTP 0x00000001) @ 0x7bf16c0e
ACPI: MCFG (v001 HP MCFG 0x06040000 LTP 0x00000000) @ 0x7bf16d90
ACPI: HPET (v001 PTLTD HPETTBL 0x06040000 LTP 0x00000001) @ 0x7bf16dcc
ACPI: MADT (v001 HP APIC 0x06040000 LTP 0x00000000) @ 0x7bf16e04
ACPI: BOOT (v001 HP $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x7bf16e62
ACPI: SLIC (v001 HPQOEM SLIC-MPC 0x06040000 LTP 0x00000001) @ 0x7bf16e8a
ACPI: DSDT (v001 HP MCP51M 0x06040000 MSFT 0x03000000) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:8 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:8 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Enabling APIC mode: Flat. Using 0 I/O APICs
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: HPET id: 0x10de8201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/ rhgb quiet
mapped APIC to ffffd000 (fee00000)
Initializing CPU#0
CPU 0 irqstacks, hard=c03f1000 soft=c03d1000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Console: colour VGA+ 80x25
spurious 8259A interrupt: IRQ7.
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2007484k/2030592k available (1883k kernel code, 22156k reserved, 761k da ta, 188k init, 1113088k highmem)
Using HPET for base-timer
Using HPET for gettimeofday
Detected 1607.898 MHz processor.
Using hpet for high-res timesource
Calibrating delay using timer specific routine.. 3217.24 BogoMIPS (lpj=1608624)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000
CPU: After vendor identify, caps: 178bfbff ebd3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(2) -> Core 0
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping 02
per-CPU timeslice cutoff: 1462.53 usecs.
task migration cache decay timeout: 1 msecs.
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c03f2000 soft=c03d2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3214.76 BogoMIPS (lpj=1607382)
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000
CPU: After vendor identify, caps: 178bfbff ebd3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1(2) -> Core 1
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping 02
Total of 2 processors activated (6432.01 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking TSC synchronization across 2 CPUs:
CPU#0 had -2006469 usecs TSC skew, fixed it up.
CPU#1 had 0 usecs TSC skew, fixed it up.
Brought up 2 CPUs
zapping low mappings.
checking if image is initramfs... it is
Freeing initrd memory: 692k freed
NET: Registered protocol family 16
PCI: BIOS BUG #81[00000282] found
PCI: Using MMCONFIG
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:10.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC0] (gpe 16)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11
ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *11
ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled.
ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *11
ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs *10)
ACPI: PCI Interrupt Link [LPMU] (IRQs 11) *10
ACPI: PCI Interrupt Link [LUS0] (IRQs 22) *11
ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7
ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10
ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 21) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 21) *0, disabled.
ACPI: PCI Interrupt Link [LPID] (IRQs 21) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 23) *5
ACPI: PCI Interrupt Link [LSI1] (IRQs 20) *10, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 18
ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 18 (level, high) -> IRQ 169
ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:0a.1[A] -> GSI 10 (level, high) -> IRQ 10
ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0a.3[B] -> GSI 11 (level, high) -> IRQ 11
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 22 (level, high) -> IRQ 177
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:0b.1[B] -> GSI 22 (level, high) -> IRQ 177
ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 23 (level, high) -> IRQ 185
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, high) -> IRQ 193
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:14.0[A] -> GSI 20 (level, high) -> IRQ 201
ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, high) -> IRQ 209
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5
ACPI: PCI Interrupt 0000:07:05.0[A] -> GSI 5 (level, high) -> IRQ 5
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7
ACPI: PCI Interrupt 0000:07:05.1[B] -> GSI 7 (level, high) -> IRQ 7
ACPI: PCI Interrupt 0000:07:05.2[B] -> GSI 7 (level, high) -> IRQ 7
ACPI: PCI Interrupt 0000:07:05.3[B] -> GSI 7 (level, high) -> IRQ 7
ACPI: PCI Interrupt 0000:07:05.4[B] -> GSI 7 (level, high) -> IRQ 7
Simple Boot Flag at 0x36 set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1189034626.866:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key F6D125003A6A5D77
- User ID: CentOS (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
ACPI: Thermal Zone [THRM] (56 C)
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
NFORCE-MCP51: chipset revision 241
NFORCE-MCP51: not 100% native mode: will probe irqs later
NFORCE-MCP51: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE-MCP51: 0000:00:0d.0 (rev f1) UDMA133 controller
ide0: BM-DMA at 0x3080-0x3087, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: HL-DT-ST DVDRAM GSA-T10N, ATAPI CD/DVD-ROM drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 262144 (order: 9, 3145728 bytes)
TCP: Hash tables configured (established 262144 bind 262144)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices:
USB0 MAC0
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 188k freed
SCSI subsystem initialized
libata version 2.00 loaded.
sata_nv 0000:00:0e.0: version 3.2
PCI: Enabling device 0000:00:0e.0 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 23 (level, high) -> IRQ 185
PCI: Setting latency timer of device 0000:00:0e.0 to 64
ata1: SATA max UDMA/133 cmd 0x30C0 ctl 0x30B6 bmdma 0x3090 irq 185
ata2: SATA max UDMA/133 cmd 0x30B8 ctl 0x30B2 bmdma 0x3098 irq 185
scsi0 : sata_nv
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7, max UDMA/100, 234441648 sectors: LBA48
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/100
scsi1 : sata_nv
ata2: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0x30BF
Vendor: ATA Model: TOSHIBA MK1234GS Rev: AH00
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security: 3 users, 4 roles, 355 types, 26 bools
security: 55 classes, 22610 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sda5, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
inserting floppy driver for 2.6.9-55.0.2.ELsmp
floppy0: no floppy controllers found
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.42-rh.
ACPI: PCI Interrupt 0000:00:14.0[A] -> GSI 20 (level, high) -> IRQ 201
PCI: Setting latency timer of device 0000:00:14.0 to 64
divert: allocating divert_blk for eth0
eth0: forcedeth.c: subsystem: 0103c:30b7 bound to 0000:00:14.0
ndiswrapper: Unknown symbol task_nice
ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, high) -> IRQ 193
PCI: Setting latency timer of device 0000:00:10.1 to 64
MC: drivers/edac/edac_mc.c version MC $Revision: 1.3 $
MC0: Giving out device to k8_edac Athlon64/Opteron: PCI 0000:00:18.2 (0000:00:18 .2)
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 18 (level, high) -> IRQ 169
PCI: Setting latency timer of device 0000:00:05.0 to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9746 Fri Dec 15 09:54:45 PST 2 006
ACPI: PCI Interrupt 0000:00:0b.1[B] -> GSI 22 (level, high) -> IRQ 177
ehci_hcd 0000:00:0b.1: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:0b.1 to 64
ehci_hcd 0000:00:0b.1: irq 177, pci mem f88b8000
SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
PCI: cache line size of 64 is not supported by device 0000:00:0b.1
ehci_hcd 0000:00:0b.1: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 22 (level, high) -> IRQ 177
ohci_hcd 0000:00:0b.0: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:0b.0 to 64
ohci_hcd 0000:00:0b.0: irq 177, pci mem f88be000
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
usb 1-4: new high speed USB device using address 3
usb 2-2: new low speed USB device using address 2
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: USB HID v1.10 Mouse [062a:0000] on usb-0000:00:0b.0-2
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Lid Switch [LID]
EXT3 FS on sda5, internal journal
device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com
device-mapper: dm-multipath version 1.0.5 loaded
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda6, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda8, type ext3), uses xattr
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0346240(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
Adding 4192924k swap on /dev/sda7. Priority:-1 extents:1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
ndiswrapper: Unknown symbol task_nice
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (8192 buckets, 65536 max) - 340 bytes per conntrack
ndiswrapper: Unknown symbol task_nice
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
lp: driver loaded but no devices found
eth0: no IPv6 routers present
ndiswrapper: Unknown symbol task_nice

I don't know what's going on there. I really sad my wireless not working eventhough I tried it for long time :-(

Please tell me what to do

Thanks and Best Regards,

User avatar
toracat
Forum Moderator
Posts: 7453
Joined: 2006/09/03 16:37:24
Location: California, US
Contact:

Re: Dell Wireless 1390 WLAN-ndiswrapper problem

Post by toracat » 2007/09/06 10:44:41

[quote]
[root@localhost driver34152]# modprobe ndiswrapper
FATAL: Error inserting ndiswrapper (/lib/modules/2.6.9-55.0.2.ELsmp/misc/ndiswrapper.ko): Unknown symbol in module, or unknown parameter (see dmesg)
[/quote]
Need more info. Show the output of the following.

/sbin/modinfo /lib/modules/2.6.9-55.0.2.ELsmp/misc/ndiswrapper.ko

find /lib/modules/`uname -r` -name ndiswrapper.ko -print

Post Reply

Return to “CentOS 4 - Networking Support”