1 box 2 dns servers

Issues related to configuring your network
Post Reply
WebRuss
Posts: 9
Joined: 2005/08/30 14:15:15
Contact:

1 box 2 dns servers

Post by WebRuss » 2007/01/20 01:54:45

Hello

I need to create a single box that serves as the primary and secondary dns server.

for example:

ns1.mydomain.net on eth0 ip 192.168.1.100
ns2.mydomain.net on eth1 ip 192.168.1.101

I've loaded the box with centos 4.4 server cd and that is as far as I got.
Is there a good guide available to walk me through doing this?

Regards
Russ

arrfab
Site Admin
Posts: 876
Joined: 2005/01/03 21:30:54
Location: /country/belgium
Contact:

1 box 2 dns servers

Post by arrfab » 2007/01/20 12:16:59

Regarding documentation, here it is .. : http://www.centos.org/docs/4/html/rhel-rg-en-4/ch-bind.html
Regarding your particular setup, i really try to see an advantage of running a primary and a secondary on the same box ... normally a secondary one is the one who will answer dns requests in case of failure on the primary ... which doesn't make sense if you run both on the same machine ....
Of course this is possible : bind will listen on all interfaces by default ...

Post Reply

Return to “CentOS 4 - Networking Support”