FireWire Device

Issues related to hardware problems
Post Reply
tamer_bakr
Posts: 1
Joined: 2008/08/07 08:24:34

FireWire Device

Post by tamer_bakr » 2008/08/07 13:21:33

Hi All,
This is my first post on this site. I hope that my problem been solved.
I have 2 nodes (Small PCs) with each have firewire PCI and connect to FireWire Harddisk. I want to install oracle RAC 10g as in http://www.oracle.com/technology/pub/articles/hunter_rac10gr2.html#9

My kernal version is
Linux linux02 2.6.9-22.ELsmp #1 SMP Sat Oct 8 19:11:43 CDT 2005 i686 i686 i386 GNU/Linux

[root@linux02 ~]# lspci
00:00.0 Host bridge: Intel Corporation 945G/P Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 945G Integrated Graphics Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1e.2 Multimedia audio controller: Intel Corporation 82801G (ICH7 Family) AC'97 Audio Controller (rev 01)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
0a:0a.0 Ethernet controller: 3Com Corporation 3c940 10/100/1000Base-T [Marvell] (rev 10)
0a:0b.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
0a:0c.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46)


[root@linux02 ~]# dmesg | grep sbp2
sbp2: $Rev: 1265 $ Ben Collins
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
ieee1394: sbp2: Maximum concurrent logins supported: 4
ieee1394: sbp2: Number of active logins: 0
ieee1394: sbp2: Logged into SBP-2 device
ieee1394: sbp2: aborting sbp2 command
ieee1394: sbp2: hpsb_node_write failed.
ieee1394: sbp2: Bus reset in progress - rejecting command
ieee1394: sbp2: reset requested
ieee1394: sbp2: Generating sbp2 fetch agent reset
ieee1394: sbp2: hpsb_node_write failed.
ieee1394: sbp2: Bus reset in progress - rejecting command
ieee1394: sbp2: reset requested
ieee1394: sbp2: Generating sbp2 fetch agent reset
ieee1394: sbp2: hpsb_node_write failed.
ieee1394: sbp2: Bus reset in progress - rejecting command
ieee1394: sbp2: reset requested
ieee1394: sbp2: Generating sbp2 fetch agent reset
ieee1394: sbp2: hpsb_node_write failed.
ieee1394: sbp2: Bus reset in progress - rejecting command
ieee1394: sbp2: Error reconnecting to SBP-2 device - reconnect failed
ieee1394: sbp2: Logged out of SBP-2 device
ieee1394: sbp2: Maximum concurrent logins supported: 4
ieee1394: sbp2: Number of active logins: 1
ieee1394: sbp2: Logged into SBP-2 device


I don't know what should i do in order to make the above command works.

from the other node
[root@linux01 ~]# dmesg | grep sbp2
sbp2: $Rev: 1265 $ Ben Collins
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
ieee1394: sbp2: Maximum concurrent logins supported: 4
ieee1394: sbp2: Number of active logins: 0
ieee1394: sbp2: Logged into SBP-2 device


Can any one help me.

gerald_clark
Posts: 10642
Joined: 2005/08/05 15:19:54
Location: Northern Illinois, USA

FireWire Device

Post by gerald_clark » 2008/08/07 13:27:53

Use the search key, and search on firewire.

Post Reply

Return to “CentOS 4 - Hardware Support”