eth0 work on RH 8 but not on CentOS 4.1

Issues related to hardware problems
Post Reply
Posts: 6
Joined: 2005/03/15 12:03:12

eth0 work on RH 8 but not on CentOS 4.1

Post by addady » 2005/10/13 19:46:35


I have problem to operate the eth0 card on CentOS/RedHat AS 4.1.

I have two OS install on the same computer each OS have its own disk and partitions.
The old OS RedHat 8 recognize and use the net card for a long time.
I didn't do any special definition to install this net card.

The new OS CentOS 4.1 identify the net card at boot but can't activate it.
Here are the message at boot:

Oct 10 10:11:15 localhost kudzu: aliased Configuring Digital Equipment Corporation DECchip 21041 [Tulip Pass

3] as tulip
Oct 10 10:11:46 localhost kudzu: ran netconfig for eth0 (Digital Equipment Corporation DECchip 21041 [Tulip

Pass 3])
Oct 10 10:12:01 localhost network: Bringing up interface eth0: failed
Oct 10 10:20:51 localhost ifup: tulip device eth0 does not seem to be present, delaying initialization.

Any idea will be appreciate.


Post Reply

Return to “CentOS 4 - Hardware Support”