Hisax : ttyI* not created

Issues related to hardware problems
Post Reply
Alterbob
Posts: 1
Joined: 2005/10/03 14:40:48

Hisax : ttyI* not created

Post by Alterbob » 2005/10/03 14:47:45

Hi,

I'm running Centos 4.1 and try to configure my isdn card, wich is a passive HiSax.

I load manually the driver with the following command :

modprobe hisax type=35 id=HiSax protocol=2

The driver is correctly loaded, but unfortunately, the corresponding devices (which are ttyI0 and ttyI1 on other system I tried the card with) are not created.

I search all the web, and it seems to be a problem with udev. I didn't find any workaround, so has someone a good solution to solve this problem ?

Thanks in advance.

Post Reply

Return to “CentOS 4 - Hardware Support”