Page 1 of 1

Adaptec Storage Manager (arcconf) Problem "Controlles found

Posted: 2016/01/06 09:20:41
by pcskrz55
Hi there!

I want to use CentOS5.11(64bit) with Adaptec 44300(Build 1918).

I've executed "rpm -ivh adp94xx.rhel5qu1.x86_64.rpm" after having extracted adp94xx-rhel5qu1_b11695.tar.gz using tarball.

After that I've also executed "rpm -ivh asm_linux_x86_64_v5_10_17173.rpm"

After PC reboot, I've executed "/usr/StorMan/arcconf getversion"

Result is;

Controllers found 0
Command completed successfully.

It seems like that Adaptec Storage Manager doesn't recognize Adaptec 44300.

Besides, it is as follows that I tried.

cat /etc/modprobe.conf
alias scsi_hostadapter1 aic94xx
alias eth0 e1000e
alias eth1 e1000e
alias scsi_hostadapter2 ahci
alias scsi_hostadapter3 usb-storage
alias scsi_hostadapter4 adp94xx

rpm -qa | grep adp

lspci | egrep -i 'raid|adaptec'
0a:01.0 Serial Attached SCSI controller: Adaptec AIC-9405W SAS (Razor-Lite HBA non-RAID) (rev 09)

Thanks for read this post.
I would be glad if somebody advise me.