Hard disk issue

Issues related to hardware problems
Post Reply
jutsinales
Posts: 1
Joined: 2020/07/16 10:04:55

Hard disk issue

Post by jutsinales » 2020/07/22 06:32:50

Hi

syslog is reporting an issue with one of the disks, I asked the isp to change the cable but still getting the same errors:

----------------------------
Aug 11 02:38:26 dr kernel: ata1: SATA max UDMA/133 abar m2048@0xb1200000 port 0xb1200100 irq 31
Aug 11 02:38:26 dr kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Aug 11 02:38:26 dr kernel: ata1.00: supports DRM functions and may not be fully accessable.
Aug 11 02:38:26 dr kernel: ata1.00: ATA-10: ST10000NM0156-2AA111, SS02, max UDMA/133
Aug 11 02:38:26 dr kernel: ata1.00: 19532873728 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
Aug 11 02:38:26 dr kernel: ata1.00: supports DRM functions and may not be fully accessable.
Aug 11 02:38:26 dr kernel: ata1.00: configured for UDMA/133
----------------------------

TIA.

User avatar
TrevorH
Site Admin
Posts: 33202
Joined: 2009/09/24 10:40:56
Location: Brighton, UK

Re: Hard disk issue

Post by TrevorH » 2020/07/22 13:22:24

There are no error messages in that quoted output. All is normal. Which bit were you worried about?
The future appears to be RHEL or Debian. I think I'm going Debian.
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke

Post Reply