This is my first post. I'll do my best
I have a CentOS release 6.10 with 2 nvidia cards (Quadro P5000). As far as I know, I installed nvidia drivers from the official page (it was a .sh file). This is the output of nvidia-smi:
Code: Select all
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 430.50 Driver Version: 430.50 CUDA Version: 10.1 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
|===============================+======================+======================|
| 0 Quadro P5000 Off | 00000000:5B:00.0 Off | Off |
| 27% 43C P0 40W / 180W | 0MiB / 16278MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 1 Quadro P5000 Off | 00000000:9E:00.0 Off | Off |
| 29% 44C P0 40W / 180W | 0MiB / 16278MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
+-----------------------------------------------------------------------------+
| Processes: GPU Memory |
| GPU PID Type Process name Usage |
|=============================================================================|
| No running processes found |
+-----------------------------------------------------------------------------+
Code: Select all
name of display: :11.0
Xlib: extension "GLX" missing on display ":11.0".
Xlib: extension "GLX" missing on display ":11.0".
Xlib: extension "GLX" missing on display ":11.0".
Xlib: extension "GLX" missing on display ":11.0".
Xlib: extension "GLX" missing on display ":11.0".
Error: couldn't find RGB GLX visual or fbconfig
Xlib: extension "GLX" missing on display ":11.0".
Xlib: extension "GLX" missing on display ":11.0".
Xlib: extension "GLX" missing on display ":11.0".
Xlib: extension "GLX" missing on display ":11.0".
Xlib: extension "GLX" missing on display ":11.0".
Xlib: extension "GLX" missing on display ":11.0".
Do I need some additional configuration? Do I need to point to another lib?
In case this helps, this is the current xorg.conf file (generated using nvidia-xconfig --enable-all-gpus --separate-x-screens):
Code: Select all
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 430.50
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0"
Screen 1 "Screen0 (1)" RightOf "Screen0"
Screen 2 "Screen0 (2)" RightOf "Screen0 (1)"
Screen 3 "Screen0 (3)" RightOf "Screen0 (2)"
Screen 4 "Screen1" RightOf "Screen0 (3)"
Screen 5 "Screen1 (1)" RightOf "Screen1"
Screen 6 "Screen1 (2)" RightOf "Screen1 (1)"
Screen 7 "Screen1 (3)" RightOf "Screen1 (2)"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib64/xorg/modules"
FontPath "catalogue:/etc/X11/fontpath.d"
FontPath "built-ins"
EndSection
Section "Module"
Load "glxserver_nvidia"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "Unknown"
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "Quadro P5000"
BusID "PCI:91:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Device0 (1)"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "Quadro P5000"
BusID "PCI:91:0:0"
Screen 1
EndSection
Section "Device"
Identifier "Device0 (2)"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "Quadro P5000"
BusID "PCI:91:0:0"
Screen 2
EndSection
Section "Device"
Identifier "Device0 (3)"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "Quadro P5000"
BusID "PCI:91:0:0"
Screen 3
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "Quadro P5000"
BusID "PCI:158:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Device1 (1)"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "Quadro P5000"
BusID "PCI:158:0:0"
Screen 1
EndSection
Section "Device"
Identifier "Device1 (2)"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "Quadro P5000"
BusID "PCI:158:0:0"
Screen 2
EndSection
Section "Device"
Identifier "Device1 (3)"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "Quadro P5000"
BusID "PCI:158:0:0"
Screen 3
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen0 (1)"
Device "Device0 (1)"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen0 (2)"
Device "Device0 (2)"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen0 (3)"
Device "Device0 (3)"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1 (1)"
Device "Device1 (1)"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1 (2)"
Device "Device1 (2)"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1 (3)"
Device "Device1 (3)"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection