Page 1 of 1

Ошибка при установке CentOS 6.6

Posted: 2021/07/21 10:05:06
by mkl_sis
Здравствуйте.
Имеем:
материнка - SuperMicro MBD-X11SCH-LN4F-O Intel C246
процессор - Intel Xeon 3400 S1151 E-2224
При установке CentOS 6.6 зависание и в последней строке сообщение: kernel_thread_helper +0x7/0x10
Вычитал, что это связано с acpi.
Тогда перед началом установки, нажав tab ввел параметр: acpi=off.
Вроде установка продолжается, доходит до места, где предлагается проверить установочный диск перед инсталляцией, проверяет его - все ОК,
а затем при дальнейшей установке зависание и черный экран.
Может еще какие параметры при инсталляции надо указать?

CentOS 6.6 does not install

Posted: 2021/07/21 12:05:31
by mkl_sis
I have a motherboard: SuperMicro MBD-X11SCH-LN4F-O Intel C246 and Intel Xeon 3400 S1151 E-2224
CentOS 6.6 does not install.
error: kernel_thread_helper 0x7/0x10
Help me please.

Re: Ошибка при установке CentOS 6.6

Posted: 2021/07/21 13:36:40
by scottro
Please note that not only CentOS-6x End of Life, but that this is considered an English only forum. You are far more likely to get answers if you post in English. We do understand that it's not everyone's first language and I've never seen anyone criticize someone for language mistakes.

Re: Ошибка при установке CentOS 6.6

Posted: 2021/07/21 13:54:45
by TrevorH
Those nice people at Google Translate spat out the following when fed the contents of that post:
Hello.
We have:
motherboard - SuperMicro MBD-X11SCH-LN4F-O Intel C246
processor - Intel Xeon 3400 S1151 E-2224
When installing CentOS 6.6 it hangs and on the last line the message is: kernel_thread_helper + 0x7 / 0x10
Subtracted that it has to do with acpi.
Then, before starting the installation, pressing tab entered the parameter: acpi = off.
It seems that the installation continues, comes to the place where it is proposed to check the installation disk before installation, checks it - everything is OK,
and then on further installation freeze and black screen.
Maybe what other parameters should be specified during installation?

Re: Ошибка при установке CentOS 6.6

Posted: 2021/07/21 13:58:44
by TrevorH
CentOS 6 is dead - support ended in November 2020 and there will be no more updates for it. Do not use it.

The latest version of CentOS 6 is 6.10 and is the only one worth considering using - though it's still dead and should not be used.

Your hardware post-dates CentOS 6.6 by several years so it's unsurprising that it does not work. Use a more recent distro than the hardware you want to use it on.

CentOS 7 is supported until 2024.

CentOS 8 is supported until the end of 2021.

Pick something that isn't already dead.

Re: Ошибка при установке CentOS 6.6

Posted: 2021/07/21 14:22:55
by mkl_sis
Ok. Need to try.