Search found 9 matches

by tech0925
2019/04/30 13:49:46
Forum: CentOS 7 - Hardware Support
Topic: Which SSD ports should I use?
Replies: 5
Views: 4092

Re: Which SSD ports should I use?

I may have answered my own question by doing some more research. It looks like the main installation would perform better on the SATAIII_0 and SATAIII_1 ports and the backup disk on the SATAIII_M0 and SATAIII_M1 ports.

Thanks again for giving me some pointers along the way that I haven't considered.
by tech0925
2019/04/30 13:12:46
Forum: CentOS 7 - Hardware Support
Topic: Which SSD ports should I use?
Replies: 5
Views: 4092

Re: Which SSD ports should I use?

Thank you Trevor! Does it matter which SATA 6/Gb/s port that I use? I'm guessing not but I just wanted to check to make sure first. The manufacturer web page is https://www.asrockrack.com/general/productdetail.asp?Model=EP2C602-4L/D16#Specifications and it clearly states 2 x 6Gbps SATA and 8 x 3Gbps...
by tech0925
2019/04/29 17:57:52
Forum: CentOS 7 - Hardware Support
Topic: Which SSD ports should I use?
Replies: 5
Views: 4092

Re: Which SSD ports should I use?

Thank you for the quick reply! Did you look at the correct MOBO model? EP2C602-4L/D16 Even in the manual it comes with it lists the ports that I mentioned at 6GB/s. Thanks for the tip on the ethernet and ram as well! Could you recommend a good PCIe SATA card that you would use instead of the existin...
by tech0925
2019/04/29 17:30:44
Forum: CentOS 7 - Hardware Support
Topic: Which SSD ports should I use?
Replies: 5
Views: 4092

Which SSD ports should I use?

Hi all, I'm setting up a new Centos 7 server and my motherboard (AsRock - EP2C602-4L/D16 https://www.newegg.com/Product/Product.aspx?Item=N82E16813157350) has several ports to use. Here is what I would like to do. I have 4 Intel 540s Series 2.5" 1TB SATA III TLC Internal Solid State Drive's. I'd lik...
by tech0925
2019/03/15 17:57:03
Forum: CentOS 7 - Hardware Support
Topic: Move /home partition to /var/www/vhosts?
Replies: 1
Views: 509

Move /home partition to /var/www/vhosts?

Hi all, I keep my web server files under /var/www/vhosts and I notice my space is allocated to the /home directory instead. # lsblk -io NAME,TYPE,SIZE,MOUNTPOINT,FSTYPE,MODEL NAME TYPE SIZE MOUNTPOINT FSTYPE MODEL sdb disk 477G Samsung SSD 860 `-sdb1 part 477G LVM2_member `-centos-home lvm 1.3T /hom...
by tech0925
2019/03/13 23:50:51
Forum: CentOS 7 - Networking Support
Topic: Upgrading Nic driver firmware
Replies: 1
Views: 994

Upgrading Nic driver firmware

Hi all, I was hoping someone could walk me through this process. I tried this in the past but I remember encountering errors so I was not able to update them. From what I can tell it is outdated and was hoping to update the driver and firmware. I'm just not comfortable trying this without out a bit ...
by tech0925
2019/03/13 23:36:21
Forum: CentOS 7 - Networking Support
Topic: Bond 5 Speed Issue
Replies: 4
Views: 550

Re: Bond 5 Speed Issue

I see, thank you for your help! It is a web server which will serve traffic to websites so it sounds like I am in a good place based on what you mentioned.
by tech0925
2019/03/13 22:08:18
Forum: CentOS 7 - Networking Support
Topic: Bond 5 Speed Issue
Replies: 4
Views: 550

Re: Bond 5 Speed Issue

Thank you! Do you suggest another bonding type?
by tech0925
2019/03/13 21:01:50
Forum: CentOS 7 - Networking Support
Topic: Bond 5 Speed Issue
Replies: 4
Views: 550

Bond 5 Speed Issue

Hi all, I ran some speed test and I was only getting about 183.90 Mbit/s. I have Cetnos 7 and I'm using a bond 5 setup on two nics. Can anyone tell what I did wrong here? # cat /proc/net/bonding/bond0 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: transmit load balancing Prim...

Go to advanced search