Search found 26 matches

by someotherguy
2020/04/25 19:19:39
Forum: CentOS 7 - Hardware Support
Topic: lshtp-ish timed out
Replies: 18
Views: 1022

Re: lshtp-ish timed out

What sort of RAID is/was it? How did you set it up? Is it linux software RAID? I was not sure, so I went into the motherboard manual and worked through all the BIOS options. Digressing for a moment: when the problem first appeared after installing the Adaptec card I checked the Supermicro web page,...
by someotherguy
2020/04/25 17:26:02
Forum: CentOS 7 - Hardware Support
Topic: lshtp-ish timed out
Replies: 18
Views: 1022

Re: lshtp-ish timed out

That's telling you that your /mnt/data filesystem did not mount. OK. That raises the question: how do I fix it? [root@localhost ~] # mount /mnt/data mount: can't find LABEL=datapartition [root@localhost ~] # lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 335.4G 0 disk |--sda1 8:1 0 1G 0 pa...
by someotherguy
2020/04/24 21:49:30
Forum: CentOS 7 - Hardware Support
Topic: lshtp-ish timed out
Replies: 18
Views: 1022

Re: lshtp-ish timed out

Try removing 'rhgb' and 'quiet' from your kernel command line by editing it at the grub prompt. The Shift-PgUp back up the output when it reaches emergency mode. Starting from the top, lines containing red font are as follows (parts of line in red are underlined)" . . . Welcome to Linux Centos 7 Co...
by someotherguy
2020/04/23 20:37:44
Forum: CentOS 7 - Hardware Support
Topic: lshtp-ish timed out
Replies: 18
Views: 1022

Re: lshtp-ish timed out

Firmware, as in the 1st diagram SH Hardware/Firmware(FW) I see it now, thanks. Looking up the definition of firmware, it says "permanent software programmed into read-only memory". https://www.kernel.org/doc/html/latest/hid/intel-ish-hid.html is still mostly Greek to me. Does it imply that perhaps ...
by someotherguy
2020/04/22 21:35:30
Forum: CentOS 7 - Hardware Support
Topic: lshtp-ish timed out
Replies: 18
Views: 1022

Re: lshtp-ish timed out

When you first get to emergency mode, use Shift-PgUp to scroll back up the messages that came out before you got there. The error(s) will be listed there. Hitting Shift-PgUp when I first get to the emergency mode screen does absolutely nothing. Hitting Shift-PgUp after logging in as root to get int...
by someotherguy
2020/04/22 19:51:42
Forum: CentOS 7 - Hardware Support
Topic: lshtp-ish timed out
Replies: 18
Views: 1022

Re: lshtp-ish timed out

Not really an answer. But what is ish? https://www.kernel.org/doc/html/latest/hid/intel-ish-hid.html Seemingly this will init your PCI, so I guess that's failing. I think this is a kernel module - perhaps boot from media and blacklist it (assuming that hardware is not there?) I looked at the link y...
by someotherguy
2020/04/22 18:38:28
Forum: CentOS 7 - Hardware Support
Topic: lshtp-ish timed out
Replies: 18
Views: 1022

Re: lshtp-ish timed out

Show us the console output from when it goes wrong. You may have to page up using Shift-PgUp to see the relevant error(s). Not quite sure what you want here. I think the gist of what you are requesting is listed in my original message in this thread. Once the system is finished doing its thing, the...
by someotherguy
2020/04/22 03:07:07
Forum: CentOS 7 - Hardware Support
Topic: lshtp-ish timed out
Replies: 18
Views: 1022

Re: lshtp-ish timed out

So that RAID array is not/was not hung off the PCI SCSI interface card that you installed? No the RAID was there from the beginning, connected directly to SATA connectors on the motherboard (Supermicro X11SSA-F). I put the SCSI interface card back in, and during boot-up I see it listed as "Adaptec ...
by someotherguy
2020/04/21 19:51:55
Forum: CentOS 7 - Hardware Support
Topic: lshtp-ish timed out
Replies: 18
Views: 1022

Re: lshtp-ish timed out

Did you also add an entry to /etc/fstab that you forgot to remove? That's the most common and easiest way to enter emergency mode... [root@localhost ~]# cat /etc/fstab #several commented lines /dev/mapper/centos/root / xfs defaults 0 0 UUID=9dedb8f1-885a-4baa-8496-a04d411d5c6b /boot xfs defaults 0 ...
by someotherguy
2020/04/20 22:08:58
Forum: CentOS 7 - Hardware Support
Topic: lshtp-ish timed out
Replies: 18
Views: 1022

lshtp-ish timed out

Multiple issues began when I installed a PCI SCSI interface card. Removing it has not fixed the problem(s). The system boots up, but the screen after the one showing multiple versions of Centos 7 (where you can choose which to run) is the usual "i8042 no controller found", followed by the new messag...

Go to advanced search